lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] i2c: iproc: fix race between client unreg and isr
On Mon, Aug 10, 2020 at 05:42:40PM -0700, Dhananjay Phadke wrote:
> When i2c client unregisters, synchronize irq before setting
> iproc_i2c->slave to NULL.
>
> (1) disable_irq()
> (2) Mask event enable bits in control reg
> (3) Erase slave address (avoid further writes to rx fifo)
> (4) Flush tx and rx FIFOs
> (5) Clear pending event (interrupt) bits in status reg
> (6) enable_irq()
> (7) Set client pointer to NULL
>
> Unable to handle kernel NULL pointer dereference at virtual address 0000000000000318
>
> [ 371.020421] pc : bcm_iproc_i2c_isr+0x530/0x11f0
> [ 371.025098] lr : __handle_irq_event_percpu+0x6c/0x170
> [ 371.030309] sp : ffff800010003e40
> [ 371.033727] x29: ffff800010003e40 x28: 0000000000000060
> [ 371.039206] x27: ffff800010ca9de0 x26: ffff800010f895df
> [ 371.044686] x25: ffff800010f18888 x24: ffff0008f7ff3600
> [ 371.050165] x23: 0000000000000003 x22: 0000000001600000
> [ 371.055645] x21: ffff800010f18888 x20: 0000000001600000
> [ 371.061124] x19: ffff0008f726f080 x18: 0000000000000000
> [ 371.066603] x17: 0000000000000000 x16: 0000000000000000
> [ 371.072082] x15: 0000000000000000 x14: 0000000000000000
> [ 371.077561] x13: 0000000000000000 x12: 0000000000000001
> [ 371.083040] x11: 0000000000000000 x10: 0000000000000040
> [ 371.088519] x9 : ffff800010f317c8 x8 : ffff800010f317c0
> [ 371.093999] x7 : ffff0008f805b3b0 x6 : 0000000000000000
> [ 371.099478] x5 : ffff0008f7ff36a4 x4 : ffff8008ee43d000
> [ 371.104957] x3 : 0000000000000000 x2 : ffff8000107d64c0
> [ 371.110436] x1 : 00000000c00000af x0 : 0000000000000000
>
> [ 371.115916] Call trace:
> [ 371.118439] bcm_iproc_i2c_isr+0x530/0x11f0
> [ 371.122754] __handle_irq_event_percpu+0x6c/0x170
> [ 371.127606] handle_irq_event_percpu+0x34/0x88
> [ 371.132189] handle_irq_event+0x40/0x120
> [ 371.136234] handle_fasteoi_irq+0xcc/0x1a0
> [ 371.140459] generic_handle_irq+0x24/0x38
> [ 371.144594] __handle_domain_irq+0x60/0xb8
> [ 371.148820] gic_handle_irq+0xc0/0x158
> [ 371.152687] el1_irq+0xb8/0x140
> [ 371.155927] arch_cpu_idle+0x10/0x18
> [ 371.159615] do_idle+0x204/0x290
> [ 371.162943] cpu_startup_entry+0x24/0x60
> [ 371.166990] rest_init+0xb0/0xbc
> [ 371.170322] arch_call_rest_init+0xc/0x14
> [ 371.174458] start_kernel+0x404/0x430
>
> Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
>
> Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com>

Applied to for-next (i.e. 5.9), thanks!

BTW my code checkers found this (unrelated to this patch):

===
CPPCHECK
drivers/i2c/busses/i2c-bcm-iproc.c:723:14: warning: Shifting signed 32-bit value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
val |= 1 << M_TX_WR_STATUS_SHIFT;
^
drivers/i2c/busses/i2c-bcm-iproc.c:741:19: warning: Shifting signed 32-bit value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
val = addr | (1 << M_TX_WR_STATUS_SHIFT);
^
===

Use the BIT macro here.

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-08-12 22:07    [W:0.049 / U:14.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site