lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC
On Mon, Aug 03, 2020 at 05:20:54PM +0300, Cristian Ciocaltea wrote:
> Add pinctrl and gpio bindings for Actions Semi S500 SoC.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> ---
> Changes in v2:
> - Added myself to the list of maintainers, per Mani's suggestion
> - Added a description item for each of the four register ranges,
> per Rob's feedback
> - Renamed the pin nodes and got rid of the if/then hack in the
> patternProperties,according to Rob's suggestion
> - Added a missing 'additionalProperties: false' line
> - Updated the example with the new node names and the split
> register range
>
> .../pinctrl/actions,s500-pinctrl.yaml | 240 ++++++++++++++++++
> 1 file changed, 240 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> new file mode 100644
> index 000000000000..33391d30c00c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> @@ -0,0 +1,240 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Actions Semi S500 SoC pinmux & GPIO controller
> +
> +maintainers:
> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> + - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> +
> +description: |
> + Pinmux & GPIO controller manages pin multiplexing & configuration including
> + GPIO function selection & GPIO attributes configuration. Please refer to
> + pinctrl-bindings.txt in this directory for common binding part and usage.
> +
> +properties:
> + compatible:
> + const: actions,s500-pinctrl
> +
> + reg:
> + items:
> + - description: GPIO Output + GPIO Input + GPIO Data
> + - description: Multiplexing Control
> + - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
> + - description: PAD Drive Capacity Select
> + minItems: 1
> + maxItems: 4
> +
> + clocks:
> + maxItems: 1
> +
> + gpio-controller: true
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + '#gpio-cells':
> + description:
> + Specifies the pin number and flags, as defined in
> + include/dt-bindings/gpio/gpio.h
> + const: 2
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + description:
> + Specifies the pin number and flags, as defined in
> + include/dt-bindings/interrupt-controller/irq.h
> + const: 2
> +
> + interrupts:
> + description:
> + One interrupt per each of the 5 GPIO ports supported by the controller,
> + sorted by port number ascending order.
> + minItems: 5
> + maxItems: 5
> +
> +patternProperties:
> + '-pins$':
> + type: object
> + patternProperties:
> + '^(.*-)?pinmux$':
> + type: object
> + description:
> + Pinctrl node's client devices specify pin muxes using subnodes,
> + which in turn use the standard properties below.
> + $ref: pinmux-node.yaml#
> +
> + properties:
> + groups:
> + description:
> + List of gpio pin groups affected by the functions specified in
> + this subnode.
> + items:
> + oneOf:

You don't need oneOf with only 1 entry.

With that and the other 2 cases fixed,

Reviewed-by: Rob Herring <robh@kernel.org>

> + - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
> + rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
> + rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
> + i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
> + ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
> + ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
> + dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
> + dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
> + spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
> + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
> + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
> + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
> + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
> + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
> + pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
> + dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
> + nand_ceb3_mfp]
> + minItems: 1
> + maxItems: 32
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the
> + given gpio pin groups.
> + enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
> + sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
> + i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
> + p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
> + mipi_csi, nand, spdif, ts, lcd0]
> +
> + required:
> + - groups
> + - function
> +
> + additionalProperties: false
> +
> + '^(.*-)?pinconf$':
> + type: object
> + description:
> + Pinctrl node's client devices specify pin configurations using
> + subnodes, which in turn use the standard properties below.
> + $ref: pincfg-node.yaml#
> +
> + properties:
> + groups:
> + description:
> + List of gpio pin groups affected by the drive-strength property
> + specified in this subnode.
> + items:
> + oneOf:
> + - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
> + rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
> + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
> + i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
> + lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
> + sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
> + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
> + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
> + sens0_ckout_drv, uart3_all_drv]
> + minItems: 1
> + maxItems: 32
> +
> + pins:
> + description:
> + List of gpio pins affected by the bias-pull-* and
> + input-schmitt-* properties specified in this subnode.
> + items:
> + oneOf:
> + - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
> + eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
> + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
> + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
> + i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
> + ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
> + lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
> + lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
> + lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
> + dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
> + dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
> + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
> + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
> + uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
> + sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
> + dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
> + uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
> + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
> + i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
> + csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
> + csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
> + dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
> + dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
> + pkg2, pkg3]
> + minItems: 1
> + maxItems: 64
> +
> + bias-pull-up: true
> + bias-pull-down: true
> +
> + drive-strength:
> + description:
> + Selects the drive strength for the specified pins, in mA.
> + enum: [2, 4, 8, 12]
> +
> + input-schmitt-enable: true
> + input-schmitt-disable: true
> +
> + additionalProperties: false
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - gpio-controller
> + - gpio-ranges
> + - '#gpio-cells'
> + - interrupt-controller
> + - '#interrupt-cells'
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + pinctrl: pinctrl@b01b0000 {
> + compatible = "actions,s500-pinctrl";
> + reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>,
> + <0xb01b0060 0x18>, <0xb01b0080 0xc>;
> + clocks = <&cmu 55>;
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 132>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> +
> + mmc0_pins: mmc0-pins {
> + pinmux {
> + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
> + "sd0_cmd_mfp", "sd0_clk_mfp";
> + function = "sd0";
> + };
> +
> + drv-pinconf {
> + groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
> + drive-strength = <8>;
> + };
> +
> + bias-pinconf {
> + pins = "sd0_d0", "sd0_d1", "sd0_d2",
> + "sd0_d3", "sd0_cmd";
> + bias-pull-up;
> + };
> + };
> + };
> +
> +...
> --
> 2.28.0
>

\
 
 \ /
  Last update: 2020-08-12 21:57    [W:0.113 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site