lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/14] mips: bmips: bcm6368: include and use dt-bindings
Date
Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/boot/dts/brcm/bcm6368.dtsi | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 449c167dd892..62599d4e6abe 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -1,4 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6368-clock.h"
+#include "dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h"
+
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -94,7 +98,7 @@ uart0: serial@10000100 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000100 0x18>;
interrupt-parent = <&periph_intc>;
- interrupts = <2>;
+ interrupts = <BCM6368_IRQ_UART0>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
@@ -104,7 +108,7 @@ uart1: serial@10000120 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000120 0x18>;
interrupt-parent = <&periph_intc>;
- interrupts = <3>;
+ interrupts = <BCM6368_IRQ_UART1>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
@@ -115,7 +119,7 @@ ehci: usb@10001500 {
reg = <0x10001500 0x100>;
big-endian;
interrupt-parent = <&periph_intc>;
- interrupts = <7>;
+ interrupts = <BCM6368_IRQ_EHCI>;
status = "disabled";
};

@@ -125,7 +129,7 @@ ohci: usb@10001600 {
big-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
- interrupts = <5>;
+ interrupts = <BCM6368_IRQ_OHCI>;
status = "disabled";
};
};
--
2.28.0
\
 
 \ /
  Last update: 2020-08-12 08:32    [W:0.157 / U:3.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site