lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v1 12/19] powerpc/signal32: Regroup copies in save_user_regs() and save_tm_user_regs()
Date
Reorder actions in save_user_regs() and save_tm_user_regs() to
regroup copies together in order to switch to user_access_begin()
logic in a later patch.

In save_tm_user_regs(), first perform copies to frame, then
perform copies to tm_frame.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/signal_32.c | 153 +++++++++++++++++++-------------
1 file changed, 91 insertions(+), 62 deletions(-)

diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 495bee1b713d..2c3d5d4400ec 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -243,6 +243,20 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,

/* Make sure floating point registers are stored in regs */
flush_fp_to_thread(current);
+#ifdef CONFIG_ALTIVEC
+ if (current->thread.used_vr)
+ flush_altivec_to_thread(current);
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ current->thread.vrsave = mfspr(SPRN_VRSAVE);
+#endif
+#ifdef CONFIG_VSX
+ if (current->thread.used_vsr && ctx_has_vsx_region)
+ flush_vsx_to_thread(current);
+#endif
+#ifdef CONFIG_SPE
+ if (current->thread.used_spe)
+ flush_spe_to_thread(current);
+#endif

/* save general registers */
if (save_general_regs(regs, frame))
@@ -251,7 +265,6 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
#ifdef CONFIG_ALTIVEC
/* save altivec registers */
if (current->thread.used_vr) {
- flush_altivec_to_thread(current);
if (__copy_to_user(&frame->mc_vregs, &current->thread.vr_state,
ELF_NVRREG * sizeof(vector128)))
return 1;
@@ -267,8 +280,6 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
* most significant bits of that same vector. --BenH
* Note that the current VRSAVE value is in the SPR at this point.
*/
- if (cpu_has_feature(CPU_FTR_ALTIVEC))
- current->thread.vrsave = mfspr(SPRN_VRSAVE);
if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
return 1;
#endif /* CONFIG_ALTIVEC */
@@ -288,7 +299,6 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
* contains valid data
*/
if (current->thread.used_vsr && ctx_has_vsx_region) {
- flush_vsx_to_thread(current);
if (copy_vsx_to_user(&frame->mc_vsregs, current))
return 1;
msr |= MSR_VSX;
@@ -297,7 +307,6 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
#ifdef CONFIG_SPE
/* save spe registers */
if (current->thread.used_spe) {
- flush_spe_to_thread(current);
if (__copy_to_user(&frame->mc_vregs, current->thread.evr,
ELF_NEVRREG * sizeof(u32)))
return 1;
@@ -314,20 +323,22 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,

if (__put_user(msr, &frame->mc_gregs[PT_MSR]))
return 1;
- /* We need to write 0 the MSR top 32 bits in the tm frame so that we
- * can check it on the restore to see if TM is active
- */
- if (tm_frame && __put_user(0, &tm_frame->mc_gregs[PT_MSR]))
- return 1;

if (sigret) {
/* Set up the sigreturn trampoline: li 0,sigret; sc */
if (__put_user(PPC_INST_ADDI + sigret, &frame->tramp[0])
|| __put_user(PPC_INST_SC, &frame->tramp[1]))
return 1;
+ }
+ if (sigret)
flush_icache_range((unsigned long) &frame->tramp[0],
(unsigned long) &frame->tramp[2]);
- }
+
+ /* We need to write 0 the MSR top 32 bits in the tm frame so that we
+ * can check it on the restore to see if TM is active
+ */
+ if (tm_frame && __put_user(0, &tm_frame->mc_gregs[PT_MSR]))
+ return 1;

return 0;
}
@@ -349,18 +360,16 @@ static int save_tm_user_regs(struct pt_regs *regs,
{
WARN_ON(tm_suspend_disabled);

- /* Save both sets of general registers */
- if (save_general_regs(&current->thread.ckpt_regs, frame)
- || save_general_regs(regs, tm_frame))
- return 1;
+#ifdef CONFIG_ALTIVEC
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ current->thread.ckvrsave = mfspr(SPRN_VRSAVE);
+#endif
+#ifdef CONFIG_SPE
+ if (current->thread.used_spe)
+ flush_spe_to_thread(current);
+#endif

- /* Stash the top half of the 64bit MSR into the 32bit MSR word
- * of the transactional mcontext. This way we have a backward-compatible
- * MSR in the 'normal' (checkpointed) mcontext and additionally one can
- * also look at what type of transaction (T or S) was active at the
- * time of the signal.
- */
- if (__put_user((msr >> 32), &tm_frame->mc_gregs[PT_MSR]))
+ if (save_general_regs(&current->thread.ckpt_regs, frame))
return 1;

#ifdef CONFIG_ALTIVEC
@@ -369,17 +378,6 @@ static int save_tm_user_regs(struct pt_regs *regs,
if (__copy_to_user(&frame->mc_vregs, &current->thread.ckvr_state,
ELF_NVRREG * sizeof(vector128)))
return 1;
- if (msr & MSR_VEC) {
- if (__copy_to_user(&tm_frame->mc_vregs,
- &current->thread.vr_state,
- ELF_NVRREG * sizeof(vector128)))
- return 1;
- } else {
- if (__copy_to_user(&tm_frame->mc_vregs,
- &current->thread.ckvr_state,
- ELF_NVRREG * sizeof(vector128)))
- return 1;
- }

/* set MSR_VEC in the saved MSR value to indicate that
* frame->mc_vregs contains valid data
@@ -392,32 +390,13 @@ static int save_tm_user_regs(struct pt_regs *regs,
* significant bits of a vector, we "cheat" and stuff VRSAVE in the
* most significant bits of that same vector. --BenH
*/
- if (cpu_has_feature(CPU_FTR_ALTIVEC))
- current->thread.ckvrsave = mfspr(SPRN_VRSAVE);
if (__put_user(current->thread.ckvrsave,
(u32 __user *)&frame->mc_vregs[32]))
return 1;
- if (msr & MSR_VEC) {
- if (__put_user(current->thread.vrsave,
- (u32 __user *)&tm_frame->mc_vregs[32]))
- return 1;
- } else {
- if (__put_user(current->thread.ckvrsave,
- (u32 __user *)&tm_frame->mc_vregs[32]))
- return 1;
- }
#endif /* CONFIG_ALTIVEC */

if (copy_ckfpr_to_user(&frame->mc_fregs, current))
return 1;
- if (msr & MSR_FP) {
- if (copy_fpr_to_user(&tm_frame->mc_fregs, current))
- return 1;
- } else {
- if (copy_ckfpr_to_user(&tm_frame->mc_fregs, current))
- return 1;
- }
-
#ifdef CONFIG_VSX
/*
* Copy VSR 0-31 upper half from thread_struct to local
@@ -428,15 +407,6 @@ static int save_tm_user_regs(struct pt_regs *regs,
if (current->thread.used_vsr) {
if (copy_ckvsx_to_user(&frame->mc_vsregs, current))
return 1;
- if (msr & MSR_VSX) {
- if (copy_vsx_to_user(&tm_frame->mc_vsregs,
- current))
- return 1;
- } else {
- if (copy_ckvsx_to_user(&tm_frame->mc_vsregs, current))
- return 1;
- }
-
msr |= MSR_VSX;
}
#endif /* CONFIG_VSX */
@@ -445,7 +415,6 @@ static int save_tm_user_regs(struct pt_regs *regs,
* simply the same as in save_user_regs().
*/
if (current->thread.used_spe) {
- flush_spe_to_thread(current);
if (__copy_to_user(&frame->mc_vregs, current->thread.evr,
ELF_NEVRREG * sizeof(u32)))
return 1;
@@ -466,9 +435,69 @@ static int save_tm_user_regs(struct pt_regs *regs,
if (__put_user(PPC_INST_ADDI + sigret, &frame->tramp[0])
|| __put_user(PPC_INST_SC, &frame->tramp[1]))
return 1;
+ }
+ if (sigret)
flush_icache_range((unsigned long) &frame->tramp[0],
(unsigned long) &frame->tramp[2]);
+
+ if (save_general_regs(regs, tm_frame))
+ return 1;
+
+ /* Stash the top half of the 64bit MSR into the 32bit MSR word
+ * of the transactional mcontext. This way we have a backward-compatible
+ * MSR in the 'normal' (checkpointed) mcontext and additionally one can
+ * also look at what type of transaction (T or S) was active at the
+ * time of the signal.
+ */
+ if (__put_user((msr >> 32), &tm_frame->mc_gregs[PT_MSR]))
+ return 1;
+
+#ifdef CONFIG_ALTIVEC
+ if (current->thread.used_vr) {
+ if (msr & MSR_VEC) {
+ if (__copy_to_user(&tm_frame->mc_vregs,
+ &current->thread.vr_state,
+ ELF_NVRREG * sizeof(vector128)))
+ return 1;
+ } else {
+ if (__copy_to_user(&tm_frame->mc_vregs,
+ &current->thread.ckvr_state,
+ ELF_NVRREG * sizeof(vector128)))
+ return 1;
+ }
+ }
+
+ if (msr & MSR_VEC) {
+ if (__put_user(current->thread.vrsave,
+ (u32 __user *)&tm_frame->mc_vregs[32]))
+ return 1;
+ } else {
+ if (__put_user(current->thread.ckvrsave,
+ (u32 __user *)&tm_frame->mc_vregs[32]))
+ return 1;
}
+#endif /* CONFIG_ALTIVEC */
+
+ if (msr & MSR_FP) {
+ if (copy_fpr_to_user(&tm_frame->mc_fregs, current))
+ return 1;
+ } else {
+ if (copy_ckfpr_to_user(&tm_frame->mc_fregs, current))
+ return 1;
+ }
+
+#ifdef CONFIG_VSX
+ if (current->thread.used_vsr) {
+ if (msr & MSR_VSX) {
+ if (copy_vsx_to_user(&tm_frame->mc_vsregs,
+ current))
+ return 1;
+ } else {
+ if (copy_ckvsx_to_user(&tm_frame->mc_vsregs, current))
+ return 1;
+ }
+ }
+#endif /* CONFIG_VSX */

return 0;
}
--
2.25.0
\
 
 \ /
  Last update: 2020-08-12 14:07    [W:0.074 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site