lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2] arm64: dts: qcom: sc7180: Add bandwidth votes for eMMC and SDcard
On 2020-08-11 22:38, Matthias Kaehlcke wrote:
> On Tue, Jul 28, 2020 at 04:49:05PM +0530, sbhanu@codeaurora.org wrote:
>> On 2020-07-28 00:40, Matthias Kaehlcke wrote:
>> > Hi,
>> >
>> > On Mon, Jul 27, 2020 at 12:20:38PM +0530, sbhanu@codeaurora.org wrote:
>> > > On 2020-07-24 22:40, Matthias Kaehlcke wrote:
>> > > > Hi Shaik,
>> > > >
>> > > > On Tue, Jul 21, 2020 at 04:16:21PM +0530, Shaik Sajida Bhanu wrote:
>> > > > > From: Pradeep P V K <ppvk@codeaurora.org>
>> > > > >
>> > > > > Add the bandwidth domain supporting performance state and
>> > > > > the corresponding OPP tables for the sdhc device on sc7180.
>> > > > >
>> > > > > Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
>> > > > > Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
>> > > > > ---
>> > > > >
>> > > > > Changes since V1:
>> > > > > - Incorporated review comments by Bjorn Andersson.
>> > > > > ---
>> > > > > arch/arm64/boot/dts/qcom/sc7180.dtsi | 15 +++++++++++++++
>> > > > > 1 file changed, 15 insertions(+)
>> > > > >
>> > > > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> > > > > b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> > > > > index 68f9894..d78a066 100644
>> > > > > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> > > > > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> > > > > @@ -684,6 +684,9 @@
>> > > > > clocks = <&gcc GCC_SDCC1_APPS_CLK>,
>> > > > > <&gcc GCC_SDCC1_AHB_CLK>;
>> > > > > clock-names = "core", "iface";
>> > > > > + interconnects = <&aggre1_noc MASTER_EMMC &mc_virt SLAVE_EBI1>,
>> > > > > + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_EMMC_CFG>;
>> > > > > + interconnect-names = "sdhc-ddr","cpu-sdhc";
>> > > > > power-domains = <&rpmhpd SC7180_CX>;
>> > > > > operating-points-v2 = <&sdhc1_opp_table>;
>> > > > >
>> > > > > @@ -704,11 +707,15 @@
>> > > > > opp-100000000 {
>> > > > > opp-hz = /bits/ 64 <100000000>;
>> > > > > required-opps = <&rpmhpd_opp_low_svs>;
>> > > > > + opp-peak-kBps = <100000 100000>;
>> > > > > + opp-avg-kBps = <100000 50000>;
>> > > > > };
>> > > > >
>> > > > > opp-384000000 {
>> > > > > opp-hz = /bits/ 64 <384000000>;
>> > > > > required-opps = <&rpmhpd_opp_svs_l1>;
>> > > > > + opp-peak-kBps = <600000 900000>;
>> > > > > + opp-avg-kBps = <261438 300000>;
>> > > > > };
>> > > > > };
>> > > > > };
>> > > > > @@ -2476,6 +2483,10 @@
>> > > > > clocks = <&gcc GCC_SDCC2_APPS_CLK>,
>> > > > > <&gcc GCC_SDCC2_AHB_CLK>;
>> > > > > clock-names = "core", "iface";
>> > > > > +
>> > > > > + interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
>> > > > > + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
>> > > > > + interconnect-names = "sdhc-ddr","cpu-sdhc";
>> > > > > power-domains = <&rpmhpd SC7180_CX>;
>> > > > > operating-points-v2 = <&sdhc2_opp_table>;
>> > > > >
>> > > > > @@ -2489,11 +2500,15 @@
>> > > > > opp-100000000 {
>> > > > > opp-hz = /bits/ 64 <100000000>;
>> > > > > required-opps = <&rpmhpd_opp_low_svs>;
>> > > > > + opp-peak-kBps = <160000 100000>;
>> > > > > + opp-avg-kBps = <80000 50000>;
>> > > > > };
>> > > > >
>> > > > > opp-202000000 {
>> > > > > opp-hz = /bits/ 64 <202000000>;
>> > > > > required-opps = <&rpmhpd_opp_svs_l1>;
>> > > > > + opp-peak-kBps = <200000 120000>;
>> > > > > + opp-avg-kBps = <100000 60000>;
>> > > > > };
>> > > > > };
>> > > > > };
>> > > >
>> > > > Does the sdhci-msm driver actually have BW scaling support at this
>> > > > point?
>> > > >
>> > >
>> > > yes
>> > >
>> > > > There is commit 4ece9795be56 ("mmc: sdhci-msm: Add interconnect
>> > > > bandwidth scaling support"), whose commit message says "make sure
>> > > > interconnect driver is ready before handling interconnect scaling.".
>> > > >
>> > > > I haven't seen any patch adding the scaling support (supposedly by
>> > > > adding dev_pm_opp_set_bw() calls?). Did I miss it? If not it seems
>> > > > it would make sense to post it in a series together with this patch,
>> > > > as far as I can tell this patch alone does nothing in practical terms.
>> > > >
>> > > > grep sdhc /sys/kernel/debug/interconnect/interconnect_summary
>> > > > 8804000.sdhci 0 0 0
>> > > > 7c4000.sdhci 0 0 0
>> > > > 7c4000.sdhci 0 0 0
>> > > > 8804000.sdhci 0 0 0
>> > > > ...
>> > >
>> > > "mmc: sdhci-msm: Use OPP API to set clk/perf
>> > > state"(https://lkml.org/lkml/2020/4/8/425) and "mmc: sdhci-msm: Add
>> > > interconnect bandwidth scaling
>> > > support"(https://lkml.org/lkml/2020/3/12/60)
>> > > with these two patches scaling will be supported for sdhci-msm driver.
>> >
>> > Are you testing with exactly these patches or with the ones that landed
>> > upstream? At least the second one changed substantially
>> >
>> > > the values in grep sdhc
>> > > /sys/kernel/debug/interconnect/interconnect_summary will be zero
>> > > during
>> > > device is in suspend state...
>> >
>> > Yes, I forgot to mention that I started MMC IO before looking at
>> > 'interconnect_summary'.
>> >
>> > > and the values in grep sdhc
>> > > /sys/kernel/debug/interconnect/interconnect_summary during device in
>> > > resume
>> > > state will be like the following::
>> > >
>> > > cicalhost / # cat
>> > > /sys/kernel/debug/interconnect/interconnect_summary | grep
>> > > sdh
>> > > 8804000.sdhci 0 60000 120000
>> > > 7c4000.sdhci 0 300000 900000
>> > > 7c4000.sdhci 0 300000 900000
>> > > 8804000.sdhci 0 60000 120000
>> > > 8804000.sdhci 0 100000 200000
>> > > 7c4000.sdhci 0 261438 600000
>> > > 8804000.sdhci 0 60000 120000
>> >
>> > On my system the bandwidth is never set:
>> >
>> > 3.590152] sdhci_msm 7c4000.sdhci: DBG: old/new frequencies (384000000
>> > Hz) are same, nothing to do
>> > https://elixir.bootlin.com/linux/v5.7.8/source/drivers/opp/core.c#L847
>> >
>> > This happens every time, even after the bandwith is set to 0. The
>> > problem
>> > seems to be that opp_table->clk doesn't change for target_freq = 0.
>> >
>> > My system is based on v5.4, so it is possible that my kernel is missing
>> > some
>> > relevant patch from upstream.
>> Hi matthias,
>>
>> In order to aviod confusion this patch is continuation of the below
>> patch::
>> "mmc: sdhci-msm: Add interconnect bandwidth scaling support"
>> (https://lkml.org/lkml/2020/6/9/160).
>
> My kernel contains this patch.
>
> As you told me in private, the patch "opp: Fix dev_pm_opp_set_rate()
> to not return early" (https://patchwork.kernel.org/patch/11707003/) is
> needed, which fixes exactly the problem I described.
>
> It seems the tree you tested was not based on the maintainer tree or
> upstream,
> please make that clear when someone reports issues. Since you said it
> works
> for you I wasted time trying to chase down a missing patch which did
> not exist
> (yet).


Hi Matthis,

Can you confirm from your end the issue that you reported got fixed
with Rajendra patch or not. Once you confirm, I can ask Bjorn to pull
this dt change.

thanks,
sajida

\
 
 \ /
  Last update: 2020-08-12 12:59    [W:0.088 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site