lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] habanalabs: correctly report inbound pci region cfg error
Date
From: Ofir Bitton <obitton@habana.ai>

During inbound iATU configuration we can get errors while
configuring PCI registers, there is a certain scenario in which these
errors are not reflected and driver is loaded with wrong configuration.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
---
drivers/misc/habanalabs/common/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/habanalabs/common/pci.c b/drivers/misc/habanalabs/common/pci.c
index b8184cb49034..2770f03b6cbb 100644
--- a/drivers/misc/habanalabs/common/pci.c
+++ b/drivers/misc/habanalabs/common/pci.c
@@ -227,7 +227,7 @@ int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region,
}

/* Point to the specified address */
- rc = hl_pci_iatu_write(hdev, offset + 0x14,
+ rc |= hl_pci_iatu_write(hdev, offset + 0x14,
lower_32_bits(pci_region->addr));
rc |= hl_pci_iatu_write(hdev, offset + 0x18,
upper_32_bits(pci_region->addr));
--
2.17.1
\
 
 \ /
  Last update: 2020-08-12 12:20    [W:0.024 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site