lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
From
Date
Hello!

On 12.08.2020 10:19, Wesley Cheng wrote:

> Add the required DTS node for the USB VBUS output regulator, which is
> available on PM8150B. This will provide the VBUS source to connected
> peripherals.
>
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/pm8150b.dtsi | 6 ++++++
> arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 ++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> index 053c659734a7..9e560c1ca30d 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> @@ -53,6 +53,12 @@ power-on@800 {
> status = "disabled";
> };
>
> + pm8150b_vbus: dcdc@1100 {

s/dcdc/regulator/? What is "dcdc", anyway?
The device nodes must have the generic names, according to the DT spec.

> + compatible = "qcom,pm8150b-vbus-reg";
> + status = "disabled";
> + reg = <0x1100>;
> + };
> +
> pm8150b_typec: typec@1500 {
> compatible = "qcom,pm8150b-usb-typec";
> status = "disabled";
[...]

MBR, Sergei

\
 
 \ /
  Last update: 2020-08-12 11:35    [W:0.102 / U:1.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site