[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [RFC PATCH 0/3] opp: required_opps: Power on genpd, scale down in reverse order
On Thu, 30 Jul 2020 at 10:02, Stephan Gerhold <> wrote:
> I'm trying to get CPR (Core Power Reduction, AVS) working for MSM8916 on mainline.
> Shortly said there are two power domains that must be scaled with the CPU OPP table:
> - (VDD)MX
> - CPR
> My idea for this was to add both as "required-opps" to the CPR OPP table
> and let the OPP core take care of all the scaling.
> There are two remaining problems that need to be addressed for that to work:
> 1. The power domains should be scaled down in reverse order
> (MX, CPR when scaling up, CPR, MX when scaling down).
> 2. Something has to enable the virtual genpd devices to make the rpmpd driver
> actually respect the performance states we vote for.
> Both issues were briefly discussed before (see links in the patches),
> but I think we did not agree on an exact solution yet. After some consideration,
> I thought it would be best to address these directly in the OPP core.
> However, note that this patch is RFC because it is just supposed to initiate
> discussion if alternative solutions would be better. :)

Ramping up since the holidays, so I might overlook something - but I
think your suggestion solution makes perfect sense to me.

> Stephan Gerhold (3):
> opp: Reduce code duplication in _set_required_opps()
> opp: Set required OPPs in reverse order when scaling down
> opp: Power on (virtual) power domains managed by the OPP core
> drivers/opp/core.c | 115 ++++++++++++++++++++++++++++++++++++---------
> drivers/opp/opp.h | 1 +
> 2 files changed, 93 insertions(+), 23 deletions(-)
> --
> 2.27.0

So, for the series:

Reviewed-by: Ulf Hansson <>

Kind regards

 \ /
  Last update: 2020-08-12 10:55    [W:0.101 / U:1.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site