lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCHv7] drivers: optee: allow op-tee to access devices on the i2c bus
On Tue, Aug 11, 2020 at 07:55:31PM +0200, Jorge Ramirez-Ortiz wrote:
> Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to
> control this type of cryptographic devices it needs coordinated access
> to the bus, so collisions and RUNTIME_PM dont get in the way.
>
> This trampoline driver allow OP-TEE to access them.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
> ---
> v7: add support for ten bit i2c slave addressing
> v6: compile out if CONFIG_I2C not enabled
> v5: alphabetic order of includes
> v4: remove unnecessary extra line in optee_msg.h
> v3: use from/to msg param to support all types of memory
> modify OPTEE_MSG_RPC_CMD_I2C_TRANSFER message id
>
> drivers/tee/optee/optee_msg.h | 21 ++++++++
> drivers/tee/optee/rpc.c | 95 +++++++++++++++++++++++++++++++++++
> 2 files changed, 116 insertions(+)
>
> diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
> index 795bc19ae17a..7b2d919da2ac 100644
> --- a/drivers/tee/optee/optee_msg.h
> +++ b/drivers/tee/optee/optee_msg.h
> @@ -419,4 +419,25 @@ struct optee_msg_arg {
> */
> #define OPTEE_MSG_RPC_CMD_SHM_FREE 7
>
> +/*
> + * Access a device on an i2c bus
> + *
> + * [in] param[0].u.value.a mode: RD(0), WR(1)
> + * [in] param[0].u.value.b i2c adapter
> + * [in] param[0].u.value.c i2c chip
> + *
> + * [in] param[1].u.value.a i2c control flags
> + *
> + * [in/out] memref[2] buffer to exchange the transfer data
> + * with the secure world
> + *
> + * [out] param[3].u.value.a bytes transferred by the driver
> + */
> +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21
> +/* I2C master transfer modes */
> +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0
> +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1
> +/* I2C master control flags */
> +#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0)
> +
> #endif /* _OPTEE_MSG_H */
> diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
> index b4ade54d1f28..b6178761d79f 100644
> --- a/drivers/tee/optee/rpc.c
> +++ b/drivers/tee/optee/rpc.c
> @@ -7,6 +7,7 @@
>
> #include <linux/delay.h>
> #include <linux/device.h>
> +#include <linux/i2c.h>
> #include <linux/slab.h>
> #include <linux/tee_drv.h>
> #include "optee_private.h"
> @@ -49,6 +50,97 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
> arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> }
>
> +#if IS_ENABLED(CONFIG_I2C)
> +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
> + struct optee_msg_arg *arg)
> +{
> + struct i2c_client client = { 0 };
> + struct tee_param *params;
> + int i, ret = -EOPNOTSUPP;
> + uint32_t attr[] = {
uint32_t seems a randomly chosen type here. The
TEE_IOCTL_PARAM_ATTR_TYPE_* defines fit in a u8.
Consider u8 attr[] = { instead.

> + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
> + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
> + TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT,
> + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT,
> + };
> +
> + if (arg->num_params != ARRAY_SIZE(attr)) {
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> + return;
> + }
> +
> + params = kmalloc_array(arg->num_params, sizeof(struct tee_param),
> + GFP_KERNEL);
> + if (!params) {
> + arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
> + return;
> + }
> +
> + if (optee_from_msg_param(params, arg->num_params, arg->params))
> + goto bad;
> +
> + for (i = 0; i < arg->num_params; i++) {
arg->num_params has an unsigned type. Consider giving i an unsigned type
too.

> + if ((params[i].attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK)
> + != attr[i])
It looks a bit funny with the comparison at the beginning of the line,
normally we try to leave those at the end of the line. But
optee_from_msg_param() doesn't set any higher bits in params[i].attr so
you could also simplify the expression as:
if (params[i].attr != attr[i])

> + goto bad;
> + }
> +
> + client.adapter = i2c_get_adapter(params[0].u.value.b);
> + if (!client.adapter)
> + goto bad;
> +
> + if (params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) {
> + if (!i2c_check_functionality(client.adapter,
> + I2C_FUNC_10BIT_ADDR)) {
> + i2c_put_adapter(client.adapter);
> + goto bad;
> + }
> +
> + client.flags = I2C_CLIENT_TEN;
> + }
> +
> + client.addr = params[0].u.value.c;
> + snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr);
> +
> + switch (params[0].u.value.a) {
> + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD:
> + ret = i2c_master_recv(&client, params[2].u.memref.shm->kaddr,
> + params[2].u.memref.size);
> + break;
> + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR:
> + ret = i2c_master_send(&client, params[2].u.memref.shm->kaddr,
> + params[2].u.memref.size);
> + break;
> + default:
> + i2c_put_adapter(client.adapter);
> + goto bad;
> + }
> +
> + if (ret < 0) {
> + arg->ret = TEEC_ERROR_COMMUNICATION;
> + } else {
> + params[3].u.value.a = ret;
> + arg->ret = TEEC_SUCCESS;
> +
> + if (optee_to_msg_param(arg->params, arg->num_params, params))
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
Need
arg->ret = TEEC_SUCCESS;
when everything is OK.

> + }
> +
> + i2c_put_adapter(client.adapter);
> + kfree(params);
> + return;
> +bad:
> + kfree(params);
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> +}
> +#else
> +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
> + struct optee_msg_arg *arg)
> +{
> + arg->ret = TEEC_ERROR_COMMUNICATION;
I'd prefer TEEC_ERROR_NOT_SUPPORTED here.
TEEC_ERROR_NOT_SUPPORTED would need to be defined as:
#define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A
in optee_private.h

Cheers,
Jens

> +}
> +#endif
> +
> static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key)
> {
> struct wq_entry *w;
> @@ -382,6 +474,9 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
> case OPTEE_MSG_RPC_CMD_SHM_FREE:
> handle_rpc_func_cmd_shm_free(ctx, arg);
> break;
> + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER:
> + handle_rpc_func_cmd_i2c_transfer(ctx, arg);
> + break;
> default:
> handle_rpc_supp_cmd(ctx, arg);
> }
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-08-12 10:44    [W:0.049 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site