lkml.org 
[lkml]   [2020]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v17 1/3] dt-bindings: Add bindings for Mediatek matrix keypad
From
Date
Hi,


On Mon, 2020-08-10 at 14:40 +0800, Fengping Yu wrote:
> From: "fengping.yu" <fengping.yu@mediatek.com>
>
> This patch add devicetree bindings for Mediatek matrix keypad driver.
>
> Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
> ---
> .../devicetree/bindings/input/mtk-kpd.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/mtk-kpd.yaml b/Documentation/devicetree/bindings/input/mtk-kpd.yaml
> new file mode 100644
> index 000000000000..d74dd8a6fbde

<...>


> + keypad,num-columns:
> + description: Number of column lines connected to the keypad controller,
> + it is not equal to PCB columns number, instead you should add required value
> + for each IC. If not specified, the default value is 1.
> +
> + keypad,num-rows:
> + description: Number of row lines connected to the keypad controller, it is
> + not equal to PCB rows number, instead you should add required value for each IC.
> + If not specified, the default value is 1.

Your source code can't really handle dts without rows/columns
properties. Also, the default value doesn't make any sense. No IC will
have rows or columns set to 1.

Since these are IC specified, not board specified, I think you should
just have the correct numbers in driver.

Joe.C

\
 
 \ /
  Last update: 2020-08-11 03:49    [W:0.106 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site