lkml.org 
[lkml]   [2020]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: imx6dl-yapp4: Add ethernet aliases
Date
Add aliases for ethernet switch ports to allow bootloader to fix
MAC addresses to the ones stored in onboard configuration EEPROM.

Ursa has only one ethernet port populated (eth2) so alias for
the first port has to be removed on this board.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 9 +++++++--
arch/arm/boot/dts/imx6dl-yapp4-ursa.dts | 4 ++++
2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 999be02d1c03..508ee6adaff8 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -8,6 +8,11 @@
#include <dt-bindings/pwm/pwm.h>

/ {
+ aliases: aliases {
+ ethernet1 = &eth1;
+ ethernet2 = &eth2;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
@@ -151,13 +156,13 @@
};
};

- port@2 {
+ eth2: port@2 {
reg = <2>;
label = "eth2";
phy-handle = <&phy_port2>;
};

- port@3 {
+ eth1: port@3 {
reg = <3>;
label = "eth1";
phy-handle = <&phy_port3>;
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
index a1173bf5bff5..f6ae24efd4aa 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -17,6 +17,10 @@
};
};

+&aliases {
+ /delete-property/ ethernet1;
+};
+
&backlight {
status = "okay";
};
--
2.1.4
\
 
 \ /
  Last update: 2020-07-30 12:23    [W:0.033 / U:2.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site