lkml.org 
[lkml]   [2020]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
On Tue, 28 Jul 2020, Michael Walle wrote:

> Am 2020-07-28 09:24, schrieb Lee Jones:
> > On Sun, 26 Jul 2020, Michael Walle wrote:
> >
> > > Add a device tree bindings for the board management controller found
> > > on
> > > the Kontron SMARC-sAL28 board.
> > >
> > > Signed-off-by: Michael Walle <michael@walle.cc>
> > > Reviewed-by: Rob Herring <robh@kernel.org>
> > > ---
> > > Changes since v5:
> > > - none
> > >
> > > Changes since v4:
> > > - fix the regex of the unit-address
> > >
> > > Changes since v3:
> > > - see cover letter
> > >
> > > .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 54 +++++++
> > > .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++++
> > > .../kontron,sl28cpld-intc.yaml | 54 +++++++
> > > .../bindings/mfd/kontron,sl28cpld.yaml | 153
> > > ++++++++++++++++++
> > > .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++++
> > > .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++++
> > > 6 files changed, 358 insertions(+)
> > > create mode 100644
> > > Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> > > create mode 100644
> > > Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
> > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
> > > create mode 100644
> > > Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
> > > create mode 100644
> > > Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
> > > create mode 100644
> > > Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> > > b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> > > new file mode 100644
> > > index 000000000000..9a63a158a796
> > > --- /dev/null
> > > +++
> > > b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> > > @@ -0,0 +1,54 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: GPIO driver for the sl28cpld board management controller
> > > +
> > > +maintainers:
> > > + - Michael Walle <michael@walle.cc>
> > > +
> > > +description: |
> > > + This module is part of the sl28cpld multi-function device. For more
> > > + details see
> > > Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
> >
> > Paths are normally relative.
>
> grep Documentation/ Documentation
>
> I know there are a lot false positives (esp in the first one)..
>
> $ grep -r "\.\./" Documentation | wc -l
> 1826
> $ grep -r "Documentation/" Documentation|wc -l
> 2862

I actually meant just for Device Tree bindings, but it does appear
that 'Documentation' is used a bunch there too.

My reasons for not liking full paths is that the intention was always
to move 'Documentation/devicetree' to a new location outside of the
kernel source tree.

[...]

> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Kontron's sl28cpld board management controller
> >
> > "S128CPLD" ?
>
> still not, its sl28cpld, think of a project/code name, not the product
> appended with CPLD.
>
> > "Board Management Controller (BMC)" ?
>
> sounds like IPMI, which I wanted to avoid.

Is there a datasheet?

> > > +maintainers:
> > > + - Michael Walle <michael@walle.cc>
> > > +
> > > +description: |
> > > + The board management controller may contain different IP blocks
> > > like
> > > + watchdog, fan monitoring, PWM controller, interrupt controller
> > > and a
> > > + GPIO controller.
> > > +
> > > +properties:
> > > + compatible:
> > > + const: kontron,sl28cpld-r1
> >
> > We don't usually code revision numbers in compatible strings.
> >
> > Is there any way to pull this from the H/W?
>
> No, unfortunately you can't. And I really want to keep that, in case
> in the future there are some backwards incompatible changes.

Rob,

I know you reviewed this already, but you can give your opinion on
this specifically please? I know that we have pushed back on this in
the past.


--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2020-07-28 10:28    [W:0.076 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site