lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v11 0/2] ADD interconnect support for Qualcomm DWC3 driver
Date
This path series aims to add interconnect support in
dwc3-qcom driver on SDM845 and SC7180 SoCs.

Changes from v10 -> v11
> Made the error handling symmetrical in enable and disable cases.
> Removed empty line in interconnect-init function.

Changes from v9 -> v10
> Removed cooments for enable,disable functions.
> Handled the enable,disable failure cases as in v8.

Changes from v8 -> v9
> Addressed comments from Matthias.

Changes from v7 -> v8
> Only driver change is pending all other patches are merged so dropped
from the series.
> Removed the device_is_bound call and getting speed from device tree
and rearranged interconnect functions to avoid forward declarations.
> Added patch to specify maximum speed for dwc3 DT node.

Changes from v6 -> v7
> [PATCH 2/4] Fixed review comments from Matthias in DWC3 driver.
> Other patches remain unchanged.

Changes from v5 -> v6
> [PATCH 1/4] Addressed comments from Rob.
> [PATCH 2/4] Fixed review comments from Matthias in DWC3 driver.
> [PATCH 3/4] Ignoring 80 char limit in defining interconnect paths.
> Added [PATCH 4/4] in this series. Adding interconnect nodes for SC7180.
Depends on patch https://patchwork.kernel.org/patch/11417989/.

Changes from v4 -> v5
> [PATCH 1/3] Added the interconnect properties in yaml. This patch depends
on series https://patchwork.kernel.org/cover/11372641/.
> [PATCH 2/3] Fixed review comments from Matthias in DWC3 driver.
> [PATCH 3/3] Modified as per the new interconnect nodes in sdm845. Depends
on series https://patchwork.kernel.org/cover/11372211/.


Changes from v3 -> v4
> Fixed review comments from Matthias
> [PATCH 1/3] and [PATCH 3/3] remains unchanged

Changes from v2 -> v3
> Fixed review comments from Matthias and Manu
> changed the functions prefix from usb_* to dwc3_qcom_*

Changes since V1:
> Comments by Georgi Djakov on "[PATCH 2/3]" addressed
> [PATCH 1/3] and [PATCH 3/3] remains unchanged

Sandeep Maheswaram (2):
usb: dwc3: qcom: Add interconnect support in dwc3 driver
arm64: dts: qcom: sc7180: Add maximum speed property for DWC3 USB node

arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 +
drivers/usb/dwc3/dwc3-qcom.c | 120 ++++++++++++++++++++++++++++++++++-
2 files changed, 119 insertions(+), 2 deletions(-)

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2020-07-27 19:08    [W:0.078 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site