Messages in this thread |  | | Date | Sat, 25 Jul 2020 11:23:39 +0200 | From | Pavel Machek <> | Subject | Re: [PATCH RFC leds + net-next v3 2/2] net: phy: marvell: add support for PHY LEDs via LED class |
| |
Hi!
> +static const struct marvell_led_mode_info marvell_led_mode_info[] = { > + { "link", { 0x0, -1, 0x0, -1, -1, -1, }, 0 }, > + { "link/act", { 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, }, 0 }, > + { "1Gbps/100Mbps/10Mbps", { 0x2, -1, -1, -1, -1, -1, }, 0 },
is this "1Gbps-10Mbps"?
> + { "act", { 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, }, 0 }, > + { "blink-act", { 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, }, 0 }, > + { "tx", { 0x5, -1, 0x5, -1, 0x5, 0x5, }, 0 }, > + { "tx", { -1, -1, -1, 0x5, -1, -1, }, L3V5_TRANS }, > + { "rx", { -1, -1, -1, -1, 0x0, 0x0, }, 0 }, > + { "rx", { -1, 0x0, -1, -1, -1, -1, }, L1V0_RECV }, > + { "copper", { 0x6, -1, -1, -1, -1, -1, }, 0 }, > + { "copper", { -1, 0x0, -1, -1, -1, -1, }, L1V0_COPPER }, > + { "1Gbps", { 0x7, -1, -1, -1, -1, -1, }, 0 }, > + { "link/rx", { -1, 0x2, -1, 0x2, 0x2, 0x2, }, 0 }, > + { "100Mbps-fiber", { -1, 0x5, -1, -1, -1, -1, }, L1V5_100_FIBER }, > + { "100Mbps-10Mbps", { -1, 0x5, -1, -1, -1, -1, }, L1V5_100_10 }, > + { "1Gbps-100Mbps", { -1, 0x6, -1, -1, -1, -1, }, 0 }, > + { "1Gbps-10Mbps", { -1, -1, 0x6, 0x6, -1, -1, }, 0 }, > + { "100Mbps", { -1, 0x7, -1, -1, -1, -1, }, 0 }, > + { "10Mbps", { -1, -1, 0x7, -1, -1, -1, }, 0 }, > + { "fiber", { -1, -1, -1, 0x0, -1, -1, }, L3V0_FIBER }, > + { "fiber", { -1, -1, -1, 0x7, -1, -1, }, L3V7_FIBER }, > + { "FullDuplex", { -1, -1, -1, 0x7, -1, -1, }, L3V7_DUPLEX }, > + { "FullDuplex", { -1, -1, -1, -1, 0x6, 0x6, }, 0 }, > + { "FullDuplex/collision", { -1, -1, -1, -1, 0x7, 0x7, }, 0 }, > + { "FullDuplex/collision", { -1, -1, 0x2, -1, -1, -1, }, L2V2_DUPLEX }, > + { "ptp", { -1, -1, 0x2, -1, -1, -1, }, L2V2_PTP }, > + { "init", { -1, -1, 0x2, -1, -1, -1, }, L2V2_INIT }, > + { "los", { -1, -1, -1, 0x0, -1, -1, }, L3V0_LOS }, > + { "hi-z", { 0xa, 0xa, 0xa, 0xa, 0xa, 0xa, }, 0 }, > + { "blink", { 0xb, 0xb, 0xb, 0xb, 0xb, 0xb, }, 0 }, > +};
Certainly more documentation will be required here, what "ptp" setting does, for example, is not very obvious to me.
Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [unhandled content-type:application/pgp-signature] |  |