lkml.org 
[lkml]   [2020]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
From
Date
Hi Thomas,

Thanks for the review. My comments inline.

On 7/9/2020 3:54 PM, Langer, Thomas wrote:
>
>> -----Original Message-----
>> From: devicetree-owner@vger.kernel.org <devicetree-
>> owner@vger.kernel.org> On Behalf Of Amireddy Mallikarjuna reddy
>> Sent: Donnerstag, 9. Juli 2020 08:01
>> To: dmaengine@vger.kernel.org; vkoul@kernel.org;
>> devicetree@vger.kernel.org; robh+dt@kernel.org
>> Cc: linux-kernel@vger.kernel.org; Shevchenko, Andriy
>> <andriy.shevchenko@intel.com>; chuanhua.lei@linux.intel.com; Kim, Cheol
>> Yong <cheol.yong.kim@intel.com>; Wu, Qiming <qi-ming.wu@intel.com>;
>> malliamireddy009@gmail.com; Amireddy Mallikarjuna reddy
>> <mallikarjunax.reddy@linux.intel.com>
>> Subject: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
>>
>> Add DT bindings YAML schema for DMA controller driver
>> of Lightning Mountain(LGM) SoC.
>>
>> Signed-off-by: Amireddy Mallikarjuna reddy
>> <mallikarjunax.reddy@linux.intel.com>
>> ---
>> v1:
>> - Initial version.
>>
>> v2:
>> - Fix bot errors.
>>
>> v3:
>> - No change.
>>
>> v4:
>> - Address Thomas langer comments
> Please read my comments again and then respond about the topics you ignored.
> I added some hints below again.
>
> Thanks.
>
>> ---
>> .../devicetree/bindings/dma/intel,ldma.yaml | 416
>> +++++++++++++++++++++
>> 1 file changed, 416 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/dma/intel,ldma.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>> b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>> new file mode 100644
>> index 000000000000..7f666b9812e4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>> @@ -0,0 +1,416 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Lightning Mountain centralized low speed DMA and high speed DMA
>> controllers.
>> +
>> +maintainers:
>> + - chuanhua.lei@intel.com
>> + - mallikarjunax.reddy@intel.com
>> +
>> +properties:
>> + $nodename:
>> + pattern: "^dma(@.*)?$"
> Please explain the difference to the common dma binding.
No difference. we can use "^dma-controller(@.*)?$" as in the common binding.
Its My bad. I missed the changes to include in this patch. Surely update
in the upcoming patch.
>
>> +
>> + "#dma-cells":
>> + const: 1
>> +
>> + compatible:
>> + anyOf:
>> + - const: intel,lgm-cdma
>> + - const: intel,lgm-dma2tx
>> + - const: intel,lgm-dma1rx
>> + - const: intel,lgm-dma1tx
>> + - const: intel,lgm-dma0tx
>> + - const: intel,lgm-dma3
>> + - const: intel,lgm-toe-dma30
>> + - const: intel,lgm-toe-dma31
> Please explain why you need so many different compatible strings.
This hw dma has 7 DMA instances.
Some for datapath, some for memcpy  and some for TOE.
Some for TX only, some for RX only, and some for TX/RX(memcpy and ToE).

dma TX/RX type we considered as driver specific data of each instance
and used different compatible strings for each instance.
And also idea is in future if any driver specific data of any particular
instance we can handle.

Here if dma name and type(tx or rx) will be accepted as devicetree
attributes then we can move .name = "toe_dma31", & .type = DMA_TYPE_MCPY
to devicetree. So that the compatible strings can be limited to two.
intel,lgm-cdma & intel,lgm-hdma .

please suggest us the better proposal.
>
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + resets:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + intel,dma-poll-cnt:
>> + $ref: /schemas/types.yaml#definitions/uint32
>> + description:
>> + DMA descriptor polling counter. It may need fine tune according
>> + to the system application scenario.
>> +
>> + intel,dma-byte-en:
>> + type: boolean
>> + description:
>> + DMA byte enable is only valid for DMA write(RX).
>> + Byte enable(1) means DMA write will be based on the number of
>> dwords
>> + instead of the whole burst.
>> +
>> + intel,dma-drb:
>> + type: boolean
>> + description:
>> + DMA descriptor read back to make sure data and desc
>> synchronization.
>> +
>> + intel,dma-burst:
>> + $ref: /schemas/types.yaml#definitions/uint32
>> + description:
>> + Specifiy the DMA burst size(in dwords), the valid value will be
>> 8, 16, 32.
>> + Default is 16 for data path dma, 32 is for memcopy DMA.
>> +
>> + intel,dma-polling-cnt:
>> + $ref: /schemas/types.yaml#definitions/uint32
>> + description:
>> + DMA descriptor polling counter. It may need fine tune according
>> to
>> + the system application scenario.
>> +
>> + intel,dma-desc-in-sram:
>> + type: boolean
>> + description:
>> + DMA descritpors in SRAM or not. Some old controllers descriptors
>> + can be in DRAM or SRAM. The new ones are all in SRAM.
>> +
>> + intel,dma-orrc:
>> + $ref: /schemas/types.yaml#definitions/uint32
>> + description:
>> + DMA outstanding read counter. The maximum value is 16, and it
>> may
>> + need fine tune according to the system application scenarios.
>> +
>> + intel,dma-dburst-wr:
>> + type: boolean
>> + description:
>> + Enable RX dynamic burst write. It only applies to RX DMA and
>> memcopy DMA.
>> +
>> +
>> + dma-ports:
>> + type: object
>> + description:
>> + This sub-node must contain a sub-node for each DMA port.
>> + properties:
>> + '#address-cells':
>> + const: 1
>> + '#size-cells':
>> + const: 0
>> +
>> + patternProperties:
>> + "^dma-ports@[0-9]+$":
>> + type: object
>> +
>> + properties:
>> + reg:
>> + items:
>> + - enum: [0, 1, 2, 3, 4, 5]
>> + description:
>> + Which port this node refers to.
>> +
>> + intel,name:
>> + $ref: /schemas/types.yaml#definitions/string-array
>> + description:
>> + Port name of each DMA port.
>> +
>> + intel,chans:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + description:
>> + The channels included on this port. Format is channel
>> start
>> + number and how many channels on this port.
>> +
>> + intel,burst:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Specify the DMA port burst size, the valid value will
>> be
>> + 2, 4, 8. Default is 2 for data path dma.
>> +
>> + intel,txwgt:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Specify the port transmit weight for QoS purpose. The
>> valid
>> + value is 1~7. Default value is 1.
>> +
>> + intel,endian:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Specify the DMA port endiannes conversion due to SoC
>> endianness difference.
>> +
>> + required:
>> + - reg
>> + - intel,name
>> + - intel,chans
>> +
>> +
>> + dma-channels:
>> + type: object
>> + description:
>> + This sub-node must contain a sub-node for each DMA channel.
>> + properties:
>> + '#address-cells':
>> + const: 1
>> + '#size-cells':
>> + const: 0
>> +
>> + patternProperties:
>> + "^dma-channels@[0-9]+$":
>> + type: object
>> +
>> + properties:
>> + reg:
>> + items:
>> + - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
>> 14, 15]
>> + description:
>> + Which channel this node refers to.
>> +
>> + intel,desc_num:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Per channel maximum descriptor number. The max value
>> is 255.
>> +
>> + intel,pkt_sz:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Channel buffer packet size. It must be power of 2.
>> + The maximum size is 4096.
>> +
>> + intel,desc-rx-nonpost:
>> + type: boolean
>> + description:
>> + Write non-posted type for DMA RX last data beat of
>> every descriptor.
>> +
>> + intel,data-endian:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Per channel data endianness configuration according to
>> SoC requirement.
>> +
>> + intel,desc-endian:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Per channel descriptor endianness configuration
>> according to SoC requirement.
>> +
>> + intel,data-endian-en:
>> + type: boolean
>> + description:
>> + Per channel data endianness enabled.
>> +
>> + intel,desc-endian-en:
>> + type: boolean
>> + description:
>> + Per channel descriptor endianness enabled.
>> +
>> + intel,byte-offset:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Per channel byte offset(0~128).
>> +
>> + intel,hdr-mode:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + description:
>> + The first parameter is header mode size, the second
>> + parameter is checksum enable or disable. If enabled,
>> + header mode size is ignored. If disabled, header mode
>> + size must be provided.
>> +
>> + intel,non-arb-cnt:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Per channel non arbitration counter while polling
>> +
>> + intel,arb-cnt:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Per channel arbitration counter while polling.
>> + arb_cnt must be greater than non_arb_cnt
>> +
>> + intel,pkt-drop:
>> + type: boolean
>> + description:
>> + Channel packet drop enabled or disabled.
>> +
>> + intel,hw-desc:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + description:
>> + Per channel dma hardware descriptor configuration.
>> + The first parameter is descriptor physical address and
>> the
>> + second parameter hardware descriptor number.
>> +
>> + required:
>> + - reg
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - '#dma-cells'
>> +
>> +examples:
>> + - |
>> + dma0: dma@e0e00000 {
>> + compatible = "intel,lgm-cdma";
>> + reg = <0xe0e00000 0x1000>;
>> + #dma-cells = <1>;
>> + interrupt-parent = <&ioapic1>;
>> + interrupts = <82 1>;
>> + resets = <&rcu0 0x30 0>;
>> + reset-names = "ctrl";
>> + clocks = <&cgu0 80>;
>> + intel,dma-poll-cnt = <4>;
>> + intel,dma-byte-en;
>> + intel,dma-drb;
>> + dma-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + dma-ports@0 {
>> + reg = <0>;
>> + intel,name = "SPI0";
>> + intel,chans = <0 2>;
>> + intel,burst = <2>;
>> + intel,txwgt = <1>;
>> + };
>> + dma-ports@1 {
>> + reg = <1>;
>> + intel,name = "SPI1";
>> + intel,chans = <2 2>;
>> + intel,burst = <2>;
>> + intel,txwgt = <1>;
>> + };
>> + dma-ports@2 {
>> + reg = <2>;
>> + intel,name = "SPI2";
>> + intel,chans = <4 2>;
>> + intel,burst = <2>;
>> + intel,txwgt = <1>;
>> + };
>> + dma-ports@3 {
>> + reg = <3>;
>> + intel,name = "SPI3";
>> + intel,chans = <6 2>;
>> + intel,burst = <2>;
>> + intel,endian = <0>;
>> + intel,txwgt = <1>;
>> + };
>> + dma-ports@4 {
>> + reg = <4>;
>> + intel,name = "HSNAND";
>> + intel,chans = <8 2>;
>> + intel,burst = <8>;
>> + intel,txwgt = <1>;
>> + };
>> + dma-ports@5 {
>> + reg = <5>;
>> + intel,name = "PCM";
>> + intel,chans = <10 6>;
>> + intel,burst = <8>;
>> + intel,txwgt = <1>;
>> + };
>> + };
>> + dma-channels {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + dma-channels@0 {
>> + reg = <0>;
>> + intel,desc_num = <1>;
>> + };
>> + dma-channels@1 {
>> + reg = <1>;
>> + intel,desc_num = <1>;
>> + };
>> + dma-channels@2 {
>> + reg = <2>;
>> + intel,desc_num = <1>;
>> + };
>> + dma-channels@3 {
>> + reg = <3>;
>> + intel,desc_num = <1>;
>> + };
>> + dma-channels@4 {
>> + reg = <4>;
>> + intel,desc_num = <1>;
>> + };
>> + dma-channels@5 {
>> + reg = <5>;
>> + intel,desc_num = <1>;
>> + };
>> + dma-channels@6 {
>> + reg = <6>;
>> + intel,desc_num = <1>;
>> + };
>> + dma-channels@7 {
>> + reg = <7>;
>> + intel,desc_num = <1>;
>> + };
>> + dma-channels@8 {
>> + reg = <8>;
>> + };
>> + dma-channels@9 {
>> + reg = <9>;
>> + };
>> + dma-channels@10 {
>> + reg = <10>;
>> + };
>> + dma-channels@11 {
>> + reg = <11>;
>> + };
>> + dma-channels@12 {
>> + reg = <12>;
>> + };
>> + dma-channels@13 {
>> + reg = <13>;
>> + };
>> + dma-channels@14 {
>> + reg = <14>;
>> + };
>> + dma-channels@15 {
>> + reg = <15>;
>> + };
>> + };
>> + };
>> + - |
>> + dma3: dma@ec800000 {
>> + compatible = "intel,lgm-dma3";
>> + reg = <0xec800000 0x1000>;
>> + clocks = <&cgu0 71>;
>> + resets = <&rcu0 0x10 9>;
>> + #dma-cells = <1>;
>> + intel,dma-burst = <32>;
>> + intel,dma-polling-cnt = <16>;
>> + intel,dma-desc-in-sram;
>> + intel,dma-orrc = <16>;
>> + intel,dma-byte-en;
>> + intel,dma-dburst-wr;
>> + dma-channels {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + dma-channels@12 {
>> + reg = <12>;
>> + intel,pkt_sz = <4096>;
>> + intel,desc-rx-nonpost;
>> + intel,data-endian = <0>;
>> + intel,desc-endian = <0>;
>> + intel,data-endian-en;
>> + intel,desc-endian-en;
>> + intel,byte-offset = <0>;
>> + intel,hdr-mode = <128 0>;
>> + intel,non-arb-cnt = <0>;
>> + intel,arb-cnt = <0>;
>> + intel,hw-desc = <0x20000000 8>;
>> + };
>> + dma-channels@13 {
>> + reg = <13>;
>> + intel,pkt-drop;
>> + intel,pkt_sz = <4096>;
>> + intel,data-endian = <0>;
>> + intel,desc-endian = <0>;
>> + intel,data-endian-en;
>> + intel,desc-endian-en;
>> + intel,byte-offset = <0>;
>> + intel,hdr-mode = <128 0>;
>> + intel,non-arb-cnt = <0>;
>> + intel,arb-cnt = <0>;
>> + };
>> + };
>> + };
>> --
>> 2.11.0

\
 
 \ /
  Last update: 2020-07-13 05:46    [W:0.115 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site