lkml.org 
[lkml]   [2020]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC 07/12] media: uapi: h264: Add DPB entry field reference flags
From
Date
Hello Jonas,

In the context of the uAPI cleanup,
I'm revisiting this patch.

On Sun, 2019-09-01 at 12:45 +0000, Jonas Karlman wrote:
> Add DPB entry flags to help indicate when a reference frame is a field picture
> and how the DPB entry is referenced, top or bottom field or full frame.
>
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> ---
> Documentation/media/uapi/v4l/ext-ctrls-codec.rst | 12 ++++++++++++
> include/media/h264-ctrls.h | 4 ++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> index bc5dd8e76567..eb6c32668ad7 100644
> --- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> @@ -2022,6 +2022,18 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
> * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
> - 0x00000004
> - The DPB entry is a long term reference frame
> + * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD_PICTURE``
> + - 0x00000008
> + - The DPB entry is a field picture
> + * - ``V4L2_H264_DPB_ENTRY_FLAG_REF_TOP``
> + - 0x00000010
> + - The DPB entry is a top field reference
> + * - ``V4L2_H264_DPB_ENTRY_FLAG_REF_BOTTOM``
> + - 0x00000020
> + - The DPB entry is a bottom field reference
> + * - ``V4L2_H264_DPB_ENTRY_FLAG_REF_FRAME``
> + - 0x00000030
> + - The DPB entry is a reference frame
>
> ``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)``
> Specifies the decoding mode to use. Currently exposes slice-based and
> diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
> index e877bf1d537c..76020ebd1e6c 100644
> --- a/include/media/h264-ctrls.h
> +++ b/include/media/h264-ctrls.h
> @@ -185,6 +185,10 @@ struct v4l2_ctrl_h264_slice_params {
> #define V4L2_H264_DPB_ENTRY_FLAG_VALID 0x01
> #define V4L2_H264_DPB_ENTRY_FLAG_ACTIVE 0x02
> #define V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM 0x04
> +#define V4L2_H264_DPB_ENTRY_FLAG_FIELD_PICTURE 0x08
> +#define V4L2_H264_DPB_ENTRY_FLAG_REF_TOP 0x10
> +#define V4L2_H264_DPB_ENTRY_FLAG_REF_BOTTOM 0x20
> +#define V4L2_H264_DPB_ENTRY_FLAG_REF_FRAME 0x30
>

I've been going thru the H264 spec and I'm unsure,
are all these flags semantically needed?

For instance, if one of REF_BOTTOM or REF_TOP (or both)
are set, doesn't that indicate it's a field picture?

Or conversely, if neither REF_BOTTOM or REF_TOP are set,
then it's a frame picture?

Thanks,
Ezequiel

\
 
 \ /
  Last update: 2020-07-10 06:22    [W:0.113 / U:24.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site