lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 15/16] Documentation: Add documentation on core scheduling
Date
From: "Joel Fernandes (Google)" <joel@joelfernandes.org>

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com>
---
.../admin-guide/hw-vuln/core-scheduling.rst | 241 ++++++++++++++++++
Documentation/admin-guide/hw-vuln/index.rst | 1 +
2 files changed, 242 insertions(+)
create mode 100644 Documentation/admin-guide/hw-vuln/core-scheduling.rst

diff --git a/Documentation/admin-guide/hw-vuln/core-scheduling.rst b/Documentation/admin-guide/hw-vuln/core-scheduling.rst
new file mode 100644
index 000000000000..275568162a74
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -0,0 +1,241 @@
+Core Scheduling
+================
+MDS and L1TF mitigations do not protect from cross-HT attacks (attacker running
+on one HT with victim running on another). For proper mitigation of this,
+core scheduling support is available via the ``CONFIG_SCHED_CORE`` config option.
+Using this feature, userspace defines groups of tasks that trust each other.
+The core scheduler uses this information to make sure that tasks that do not
+trust each other will never run simultaneously on a core while ensuring trying
+to maintain and ensure scheduler properties and requirements.
+
+Usage
+-----
+The user-interface to this feature is not yet finalized. CUrrent implementation
+uses CPU controller cgroup. Core scheduling adds a ``cpu.tag`` file to the CPU
+controller CGroup. If the content of this file is 1, then all the tasks in this
+CGroup trust each other and are allowed to run concurrently on the siblings of
+a core.
+
+This interface has drawbacks. Trusted tasks has to be grouped into one CPU CGroup
+and this is not always possible based on system's existing Cgroup configuration,
+where trusted tasks could already be in different CPU Cgroups. Also, this feature
+will have a hard dependency on CGroups and systems with CGroups disabled would not
+be able to use core scheduling. See `Future work`_ for other API proposals.
+
+Design/Implementation
+---------------------
+Tasks are grouped as mentioned in `Usage`_ and tasks that trust each other
+share the same cookie value(in task_struct).
+
+The basic idea is that, every schedule event tries to select tasks for all the
+siblings of a core such that all the selected tasks are trusted(same cookie).
+
+During a schedule event on any sibling of a core, the highest priority task for
+that core is picked and assigned to the sibling which has it enqueued. For rest of
+the siblings in the core, highest priority task with the same cookie is selected if
+there is one runnable in the run queue. If a task with same cookie is not available,
+idle task is selected. Idle task is globally trusted.
+
+Once a task has been selected for all the siblings in the core, an IPI is sent to
+all the siblings who has a new task selected. Siblings on receiving the IPI, will
+switch to the new task immediately.
+
+Force-idling of tasks
+---------------------
+The scheduler tries its best to find tasks that trust each other such that all
+tasks selected to be scheduled are of the highest priority in that runqueue.
+However, this is not always possible. Favoring security over fairness, one or
+more siblings could be forced to select a lower priority task if the highest
+priority task is not trusted with respect to the core wide highest priority task.
+If a sibling does not have a trusted task to run, it will be forced idle by the
+scheduler(idle thread is scheduled to run).
+
+When the highest priorty task is selected to run, a reschedule-IPI is sent to
+the sibling to force it into idle. This results in 4 cases which need to be
+considered depending on whether a VM or a regular usermode process was running
+on either HT:
+
+::
+ HT1 (attack) HT2 (victim)
+
+ A idle -> user space user space -> idle
+
+ B idle -> user space guest -> idle
+
+ C idle -> guest user space -> idle
+
+ D idle -> guest guest -> idle
+
+Note that for better performance, we do not wait for the destination CPU
+(victim) to enter idle mode. This is because the sending of the IPI would
+bring the destination CPU immediately into kernel mode from user space, or
+VMEXIT from guests. At best, this would only leak some scheduler metadata which
+may not be worth protecting.
+
+Protection against interrupts using IRQ pausing
+-----------------------------------------------
+The scheduler on its own cannot protect interrupt data. This is because the
+scheduler is unaware of interrupts at scheduling time. To mitigate this, we
+send an IPI to siblings on IRQ entry. This IPI handler busy-waits until the IRQ
+on the sending HT exits. For good performance, we send an IPI only if it is
+detected that the core is running tasks that have been marked for
+core scheduling. Both interrupts and softirqs are protected.
+
+This protection can be disabled by disabling ``CONFIG_SCHED_CORE_IRQ_PAUSE`` or
+through the ``sched_core_irq_pause`` boot parameter.
+
+If it is desired to disable IRQ pausing, other mitigation methods can be considered:
+
+1. Changing interrupt affinities to a trusted core which does not execute untrusted tasks
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+By changing the interrupt affinities to a designated safe-CPU which runs
+only trusted tasks, IRQ data can be protected. One issue is this involves
+giving up a full CPU core of the system to run safe tasks. Another is that,
+per-cpu interrupts such as the local timer interrupt cannot have their
+affinity changed. also, sensitive timer callbacks such as the random entropy timer
+can run in softirq on return from these interrupts and expose sensitive
+data. In the future, that could be mitigated by forcing softirqs into threaded
+mode by utilizing a mechanism similar to ``PREEMPT_RT``.
+
+Yet another issue with this is, for multiqueue devices with managed
+interrupts, the IRQ affinities cannot be changed however it could be
+possible to force a reduced number of queues which would in turn allow to
+shield one or two CPUs from such interrupts and queue handling for the price
+of indirection.
+
+2. Running IRQs as threaded-IRQs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+This would result in forcing IRQs into the scheduler which would then provide
+the process-context mitigation. However, not all interrupts can be threaded.
+
+Trust model
+-----------
+Core scheduling understands trust relationships by assignment of a cookie to
+related tasks using the above mentioned interface. When a system with core
+scheduling boots, all tasks are considered to trust each other. This is because
+the scheduler does not have information about trust relationships. That is, all
+tasks have a default cookie value of 0. This cookie value is also considered
+the system-wide cookie value and the IRQ-pausing mitigation is avoided if
+siblings are running these cookie-0 tasks.
+
+By default, all system processes on boot are considered trusted and userspace
+has to explicitly use the interfaces mentioned above to group sets of tasks.
+Tasks within the group trust each other, but not those outside. Tasks outside
+the group don't trust the task inside.
+
+Limitations
+-----------
+Core scheduling tries to guarentee that only trusted tasks run concurrently on a
+core. But there could be small window of time during which untrusted tasks run
+concurrently or kernel could be running concurrently with a task not trusted by
+kernel.
+
+1. IPI processing delays
+^^^^^^^^^^^^^^^^^^^^^^^^
+Core scheduling selects only trusted tasks to run together. IPI is used to notify
+the siblings to switch to the new task. But there could be hardware delays in
+receiving of the IPI on some arch (on x86, this has not been observed). This may
+cause an attacker task to start running on a cpu before its siblings receive the
+IPI. Even though cache is flushed on entry to user mode, victim tasks on siblings
+may populate data in the cache and micro acrhitectural buffers after the attacker
+starts to run and this is a possibility for data leak.
+
+2. Asynchronous Kernel entries
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+A task can switch to kernel any time due to events like irqs, system calls etc.
+Since core scheduling synchronizes only during a schedule event, kernel can run
+along with a task that it doesn't trust. The IRQ pause mechanism mentioned above,
+provides protection during nmi/irq/softirqs. But tasks could still enter kernel
+mode via system calls and this is not currently protected.
+
+There are ideas about mitigating this:
+ - Kernel Address Space Isolation: System calls could run in a much restricted
+ address space which is guarenteed not to leak any sensitive data. There are
+ practical limitation in implementing this - the main concern being how to
+ decided on an address space that is guarenteed to not have any sensitive
+ data
+ - On a system call, change the cookie to the system trusted cookie and initiate
+ a schedule event. This would be better than pausing all the siblings during
+ the entire duration for the system call, but still would be a huge hit to the
+ performance.
+
+Open cross-HT issues that core scheduling does not solve
+--------------------------------------------------------
+1. For MDS
+^^^^^^^^^^
+Core scheduling cannot protect against MDS attacks between an HT running in
+user mode and another running in kernel mode. Even though both HTs run tasks
+which trust each other, kernel memory is still considered untrusted. Such
+attacks are possible for any combination of sibling CPU modes (host or guest mode).
+
+2. For L1TF
+^^^^^^^^^^^
+Core scheduling cannot protect against a L1TF guest attackers exploiting a
+guest or host victim. This is because the guest attacker can craft invalid
+PTEs which are not inverted due to a vulnerable guest kernel. The only
+solution is to disable EPT.
+
+For both MDS and L1TF, if the guest vCPU is configured to not trust each
+other (by tagging separately), then the guest to guest attacks would go away.
+Or it could be a system admin policy which considers guest to guest attacks as
+a guest problem.
+
+Another approach to resolve these would be to make every untrusted task on the
+system to not trust every other untrusted task. While this could reduce
+parallelism of the untrusted tasks, it would still solve the above issues while
+allowing system processes (trusted tasks) to share a core.
+
+Use cases
+---------
+The main use case for Core scheduling is mitigating the cross-HT vulnerabilities
+with SMT enabled. There are other use cases where this feature could be used:
+
+- Isolating tasks that needs a whole core: Examples include realtime tasks, tasks
+ that uses SIMD instructions etc.
+- Gang scheduling: Requirements for a group of tasks that needs to be scheduled
+ together could also be realized using core scheduling. One example is vcpus of
+ a VM.
+
+Future work
+-----------
+1. API Proposals
+^^^^^^^^^^^^^^^^
+
+As mentioned in `Usage`_ section, various API proposals are listed here:
+
+- ``prctl`` : We can pass in a tag and all tasks with same tag set by prctl forms
+ a trusted group.
+
+- ``sched_setattr`` : Similar to prctl, but has the advantage that tasks could be
+ tagged by other tasks with appropriate permissions.
+
+- ``Auto Tagging`` : Related tasks are tagged automatically. Relation could be,
+ threads of the same process, tasks by a user, group or session etc.
+
+- Dedicated cgroup or procfs/sysfs interface for grouping trusted tasks. This could
+ be combined with prctl/sched_setattr as well.
+
+2. Auto-tagging of KVM vCPU threads
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+To make configuration easier, it would be great if KVM auto-tags vCPU threads
+such that a given VM only trusts other vCPUs of the same VM. Or something more
+aggressive like assiging a vCPU thread a unique tag.
+
+3. Auto-tagging of processes by default
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Currently core scheduling does not prevent 'unconfigured' tasks from being
+co-scheduled on the same core. In other words, everything trusts everything
+else by default. If a user wants everything default untrusted, a CONFIG option
+could be added to assign every task with a unique tag by default.
+
+4. Auto-tagging on fork
+^^^^^^^^^^^^^^^^^^^^^^^
+Currently, on fork a thread is added to the same trust-domain as the parent. For
+systems which want all tasks to have a unique tag, it could be desirable to assign
+a unique tag to a task so that the parent does not trust the child by default.
+
+5. Skipping per-HT mitigations if task is trusted
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+If core scheduling is enabled, by default all tasks trust each other as
+mentioned above. In such scenario, it may be desirable to skip the same-HT
+mitigations on return to the trusted user-mode to improve performance.
diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst
index ca4dbdd9016d..f12cda55538b 100644
--- a/Documentation/admin-guide/hw-vuln/index.rst
+++ b/Documentation/admin-guide/hw-vuln/index.rst
@@ -15,3 +15,4 @@ are configurable at compile, boot or run time.
tsx_async_abort
multihit.rst
special-register-buffer-data-sampling.rst
+ core-scheduling.rst
--
2.17.1
\
 
 \ /
  Last update: 2020-06-30 23:34    [W:0.358 / U:9.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site