[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support
Hi Tero,

This series adds SERDES PHY support and Type-C USB Super-Speed support
to the J721E EVM.

Please queue this for -next. Thanks.


- Removed redundant patch
- used compaible string for yaml filename
- typo fix s/mdf/mfd in patch subject
- added simple-mfd, address-cells, size-cells and ranges

- Add new DT schema for J721E System controller.
- Re-order system controller's compatible string i.e. most compatible to least.

- Addressed Rob's comments.
- Changed type-C debounce delay from 300ms to 700ms as 300ms is not
sufficient on EVM.

Kishon Vijay Abraham I (2):
arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES
lane mux

Roger Quadros (4):
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system
arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR

.../mfd/ti,j721e-system-controller.yaml | 74 +++++
.../dts/ti/k3-j721e-common-proc-board.dts | 33 ++-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 275 ++++++++++++++++++
include/dt-bindings/mux/mux-j721e-wiz.h | 53 ++++
4 files changed, 433 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

 \ /
  Last update: 2020-06-30 01:15    [W:0.091 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site