lkml.org 
[lkml]   [2020]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: rawnand: gpmi: fix reference count leak due to pm_runtime_get_sync
Date
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 061a8ddda275..657c0be5c038 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -149,8 +149,10 @@ static int gpmi_init(struct gpmi_nand_data *this)
int ret;

ret = pm_runtime_get_sync(this->dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_autosuspend(this->dev);
return ret;
+ }

ret = gpmi_reset_block(r->gpmi_regs, false);
if (ret)
@@ -2264,8 +2266,10 @@ static int gpmi_nfc_exec_op(struct nand_chip *chip,
this->transfers[i].direction = DMA_NONE;

ret = pm_runtime_get_sync(this->dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_autosuspend(this->dev);
return ret;
+ }

/*
* This driver currently supports only one NAND chip. Plus, dies share
--
2.25.1
\
 
 \ /
  Last update: 2020-06-14 05:44    [W:0.041 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site