lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v7 2/5] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details
Date


On 4/29/20 5:01 PM, Michael Ellerman wrote:
> Hi Kajol,
>
> Some comments inline ...
>
> Kajol Jain <kjain@linux.ibm.com> writes:
>> For hv_24x7 socket/chip level events, specific chip-id to which
>> the data requested should be added as part of pmu events.
>> But number of chips/socket in the system details are not exposed.
>>
>> Patch implements read_sys_info_pseries() to get system
>> parameter values like number of sockets and chips per socket.
>> Rtas_call with token "PROCESSOR_MODULE_INFO"
>> is used to get these values.
>>
>> Sub-sequent patch exports these values via sysfs.
>>
>> Patch also make these parameters default to 1.
>>
>> Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
>> ---
>> arch/powerpc/perf/hv-24x7.c | 72 ++++++++++++++++++++++++
>> arch/powerpc/platforms/pseries/pseries.h | 3 +
>> 2 files changed, 75 insertions(+)
>>
>> diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
>> index 48e8f4b17b91..9ae00f29bd21 100644
>> --- a/arch/powerpc/perf/hv-24x7.c
>> +++ b/arch/powerpc/perf/hv-24x7.c
>> @@ -20,6 +20,11 @@
>> #include <asm/io.h>
>> #include <linux/byteorder/generic.h>
>>
>> +#ifdef CONFIG_PPC_RTAS
>
> This driver can only be build on pseries, and pseries always selects
> RTAS. So the ifdef is unncessary.

Hi Michael,
Thanks for review, I will remove this check.

>
>> +#include <asm/rtas.h>
>> +#include <../../platforms/pseries/pseries.h>
>> +#endif
>
> That's not really what the platform header is intended for.
>
> You should put the extern in arch/powerpc/include/asm somewhere.
>
> Maybe rtas.h
>
>> @@ -57,6 +62,69 @@ static bool is_physical_domain(unsigned domain)
>> }
>> }
>>
>> +#ifdef CONFIG_PPC_RTAS
>
> Not needed.
>
>> +#define PROCESSOR_MODULE_INFO 43
>
> Please document where these come from, presumably LoPAPR somewhere?
>

Sure, will add the details.

>> +#define PROCESSOR_MAX_LENGTH (8 * 1024)
>> +
>> +static int strbe16toh(const char *buf, int offset)
>> +{
>> + return (buf[offset] << 8) + buf[offset + 1];
>> +}
>
> I'm confused by this. "str" implies string, a string is an array of
> bytes and has no endian. But then be16 implies it's an array of __be16,
> in which case buf should be a __be16 *.
>

Yes right, actually I was following implementation in util-linux. But what you
suggested make more sense, will update accordingly.

>> +
>> +static u32 physsockets; /* Physical sockets */
>> +static u32 physchips; /* Physical chips */
>
> No tabs there please.

Sure will update.

>
>> +
>> +/*
>> + * Function read_sys_info_pseries() make a rtas_call which require
>> + * data buffer of size 8K. As standard 'rtas_data_buf' is of size
>> + * 4K, we are adding new local buffer 'rtas_local_data_buf'.
>> + */
>> +char rtas_local_data_buf[PROCESSOR_MAX_LENGTH] __cacheline_aligned;
>
> static?
>
>> +/*
>> + * read_sys_info_pseries()
>> + * Retrieve the number of sockets and chips per socket details
>> + * through the get-system-parameter rtas call.
>> + */
>> +void read_sys_info_pseries(void)
>> +{
>> + int call_status, len, ntypes;
>> +
>> + /*
>> + * Making system parameter: chips and sockets default to 1.
>> + */
>> + physsockets = 1;
>> + physchips = 1;
>> + memset(rtas_local_data_buf, 0, PROCESSOR_MAX_LENGTH);
>> + spin_lock(&rtas_data_buf_lock);
>
> You're not using the rtas_data_buf, so why are you taking the
> rtas_data_buf_lock?

Sure, I will add new lock specific for rtas_local_data_buf

>
>> + call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
>> + NULL,
>> + PROCESSOR_MODULE_INFO,
>> + __pa(rtas_local_data_buf),
>> + PROCESSOR_MAX_LENGTH);
>> +
>> + spin_unlock(&rtas_data_buf_lock);
>> +
>> + if (call_status != 0) {
>> + pr_info("%s %s Error calling get-system-parameter (0x%x)\n",
>> + __FILE__, __func__, call_status);
>
> pr_err(), don't use __FILE__, this file already uses pr_fmt(). Not sure
> __func__ is really necessary either
>
> return;
>
> Then you can deindent the next block.
>
>> + } else {
>> + rtas_local_data_buf[PROCESSOR_MAX_LENGTH - 1] = '\0';
>> + len = strbe16toh(rtas_local_data_buf, 0);
>
> Why isn't the buffer a __be16 array, and then you just use be16_to_cpu() ?
>
>> + if (len < 6)
>> + return;
>> +
>> + ntypes = strbe16toh(rtas_local_data_buf, 2);
>> +
>> + if (!ntypes)
>> + return;
>
> What is ntype
ntype specify processor module type

>
>> + physsockets = strbe16toh(rtas_local_data_buf, 4);
>> + physchips = strbe16toh(rtas_local_data_buf, 6);
>> + }
>> +}
>> +#endif /* CONFIG_PPC_RTAS */
>> +
>> /* Domains for which more than one result element are returned for each event. */
>> static bool domain_needs_aggregation(unsigned int domain)
>> {
>> @@ -1605,6 +1673,10 @@ static int hv_24x7_init(void)
>> if (r)
>> return r;
>>
>> +#ifdef CONFIG_PPC_RTAS
>> + read_sys_info_pseries();
>> +#endif
>

Will remove this config checks.

Thanks,
Kajol Jain


>> +
>> return 0;
>> }
>>
>> diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
>> index 13fa370a87e4..1727559ce304 100644
>> --- a/arch/powerpc/platforms/pseries/pseries.h
>> +++ b/arch/powerpc/platforms/pseries/pseries.h
>> @@ -19,6 +19,9 @@ extern void request_event_sources_irqs(struct device_node *np,
>> struct pt_regs;
>>
>> extern int pSeries_system_reset_exception(struct pt_regs *regs);
>> +#ifdef CONFIG_PPC_RTAS
>> +extern void read_sys_info_pseries(void);
>> +#endif
>> extern int pSeries_machine_check_exception(struct pt_regs *regs);
>> extern long pseries_machine_check_realmode(struct pt_regs *regs);
> >
> cheers
>

\
 
 \ /
  Last update: 2020-05-06 11:55    [W:0.076 / U:3.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site