lkml.org 
[lkml]   [2020]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 28/28] dt-bindings: usb: Convert ehci-mv to json-schema
On Sun, May 17, 2020 at 1:34 PM Lubomir Rintel <lkundrak@v3.sk> wrote:
>
> On Fri, Mar 27, 2020 at 01:55:20PM -0600, Rob Herring wrote:
> > On Tue, Mar 17, 2020 at 10:39:22AM +0100, Lubomir Rintel wrote:
> > > A straightforward conversion of the ehci-mv binding to DT schema format
> > > using json-schema.
> > >
> > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > > ---
> > > .../devicetree/bindings/usb/ehci-mv.txt | 23 -------
> > > .../bindings/usb/marvell,pxau2o-ehci.yaml | 60 +++++++++++++++++++
> > > 2 files changed, 60 insertions(+), 23 deletions(-)
> > > delete mode 100644 Documentation/devicetree/bindings/usb/ehci-mv.txt
> > > create mode 100644 Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt
> > > deleted file mode 100644
> > > index 335589895763e..0000000000000
> > > --- a/Documentation/devicetree/bindings/usb/ehci-mv.txt
> > > +++ /dev/null
> > > @@ -1,23 +0,0 @@
> > > -* Marvell PXA/MMP EHCI controller.
> > > -
> > > -Required properties:
> > > -
> > > -- compatible: must be "marvell,pxau2o-ehci"
> > > -- reg: physical base addresses of the controller and length of memory mapped region
> > > -- interrupts: one EHCI controller interrupt should be described here
> > > -- clocks: phandle list of usb clocks
> > > -- clock-names: should be "USBCLK"
> > > -- phys: phandle for the PHY device
> > > -- phy-names: should be "usb"
> > > -
> > > -Example:
> > > -
> > > - ehci0: usb-ehci@d4208000 {
> > > - compatible = "marvell,pxau2o-ehci";
> > > - reg = <0xd4208000 0x200>;
> > > - interrupts = <44>;
> > > - clocks = <&soc_clocks MMP2_CLK_USB>;
> > > - clock-names = "USBCLK";
> > > - phys = <&usb_otg_phy>;
> > > - phy-names = "usb";
> > > - };
> > > diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> > > new file mode 100644
> > > index 0000000000000..189025ef1e92e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> > > @@ -0,0 +1,60 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> >
> > Same license comment.
>
> I wrote that binding document and chose that license.

Okay, but please make it GPL-2.0-only instead of or-later. If everyone
was attentive to licensing picking their own variations would be fine,
but they aren't and just copy-n-paste. So there's 2 choices
GPL-2.0-only (for converted bindings) or (GPL-2.0-only OR
BSD-2-Clause) for new or re-licensed bindings.

Rob

\
 
 \ /
  Last update: 2020-05-18 17:21    [W:0.048 / U:9.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site