lkml.org 
[lkml]   [2020]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/12] i2c: designware: Move Baytrail sem config to the platform if-clause
Date
Currently Intel Baytrail I2C semaphore is a feature of the DW APB I2C
platform driver. It's a bit confusing to see it's config in the menu at
some separated place with no reference to the platform code. Lets move the
config definition under the if-I2C_DESIGNWARE_PLATFORM clause. By doing so
the config menu will display the feature right below the DW I2C platform
driver item and will indent it to the right so signifying its belonging.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
drivers/i2c/busses/Kconfig | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 368aa64e9266..ed6927c4c540 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -530,8 +530,8 @@ config I2C_DESIGNWARE_CORE

config I2C_DESIGNWARE_PLATFORM
tristate "Synopsys DesignWare Platform"
- select I2C_DESIGNWARE_CORE
depends on (ACPI && COMMON_CLK) || !ACPI
+ select I2C_DESIGNWARE_CORE
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter.
@@ -539,6 +539,22 @@ config I2C_DESIGNWARE_PLATFORM
This driver can also be built as a module. If so, the module
will be called i2c-designware-platform.

+if I2C_DESIGNWARE_PLATFORM
+
+config I2C_DESIGNWARE_BAYTRAIL
+ bool "Intel Baytrail I2C semaphore support"
+ depends on ACPI
+ depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
+ (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
+ help
+ This driver enables managed host access to the PMIC I2C bus on select
+ Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
+ the host to request uninterrupted access to the PMIC's I2C bus from
+ the platform firmware controlling it. You should say Y if running on
+ a BayTrail system using the AXP288.
+
+endif # I2C_DESIGNWARE_PLATFORM
+
config I2C_DESIGNWARE_SLAVE
bool "Synopsys DesignWare Slave"
depends on I2C_DESIGNWARE_CORE
@@ -561,18 +577,6 @@ config I2C_DESIGNWARE_PCI
This driver can also be built as a module. If so, the module
will be called i2c-designware-pci.

-config I2C_DESIGNWARE_BAYTRAIL
- bool "Intel Baytrail I2C semaphore support"
- depends on ACPI
- depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
- (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
- help
- This driver enables managed host access to the PMIC I2C bus on select
- Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
- the host to request uninterrupted access to the PMIC's I2C bus from
- the platform firmware controlling it. You should say Y if running on
- a BayTrail system using the AXP288.
-
config I2C_DIGICOLOR
tristate "Conexant Digicolor I2C driver"
depends on ARCH_DIGICOLOR || COMPILE_TEST
--
2.25.1
\
 
 \ /
  Last update: 2020-05-10 11:51    [W:0.248 / U:5.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site