lkml.org 
[lkml]   [2020]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 3/4] arm64: dts: ti: am654: Add thermal zones
On Tue, Mar 31, 2020 at 1:24 PM Keerthy <j-keerthy@ti.com> wrote:
>
> The am654 SoC has three thermal zones namely MPU0, MPU1 and MCU
> zones
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
> .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
> new file mode 100644
> index 000000000000..cdc3d40c3f60
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/thermal/thermal.h>
> +
> +mpu0_thermal: mpu0_thermal {
> + polling-delay-passive = <250>; /* milliseconds */
> + polling-delay = <500>; /* milliseconds */
> + thermal-sensors = <&wkup_vtm0 0>;

You are referencing the wkup_vtm0 node before defining it in the next patch.

Swap the order of the patches and move the include for thermal zones
to this patch.

> +
> + trips {
> + mpu0_crit: mpu0_crit {
> + temperature = <125000>; /* milliCelsius */
> + hysteresis = <2000>; /* milliCelsius */
> + type = "critical";
> + };
> + };
> +};
> +
> +mpu1_thermal: mpu1_thermal {
> + polling-delay-passive = <250>; /* milliseconds */
> + polling-delay = <500>; /* milliseconds */
> + thermal-sensors = <&wkup_vtm0 1>;
> +
> + trips {
> + mpu1_crit: mpu1_crit {
> + temperature = <125000>; /* milliCelsius */
> + hysteresis = <2000>; /* milliCelsius */
> + type = "critical";
> + };
> + };
> +};
> +
> +mcu_thermal: mcu_thermal {
> + polling-delay-passive = <250>; /* milliseconds */
> + polling-delay = <500>; /* milliseconds */
> + thermal-sensors = <&wkup_vtm0 2>;
> +
> + trips {
> + mcu_crit: mcu_crit {
> + temperature = <125000>; /* milliCelsius */
> + hysteresis = <2000>; /* milliCelsius */
> + type = "critical";
> + };
> + };
> +};
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-04-06 21:05    [W:0.078 / U:10.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site