lkml.org 
[lkml]   [2020]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
Hi, Jitao:

Jitao Shi <jitao.shi@mediatek.com> 於 2020年4月5日 週日 下午9:39寫道:
>
>
> On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> > Hi, Jitao:
> >
> > Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道:
> > >
> > > Read calibration data from nvmem, and config mipitx impedance with
> > > calibration data to make sure their impedance are 100ohm.
> > >
> > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > > 1 file changed, 57 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > index e4cc967750cb..0f87cd3d1d7d 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > @@ -5,6 +5,8 @@
> > > */
> > >
> > > #include "mtk_mipi_tx.h"
> > > +#include <linux/nvmem-consumer.h>
> > > +#include <linux/slab.h>
> > >
> > > #define MIPITX_LANE_CON 0x000c
> > > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > > @@ -28,6 +30,7 @@
> > > #define MIPITX_PLL_CON4 0x003c
> > > #define RG_DSI_PLL_IBIAS (3 << 10)
> > >
> > > +#define MIPITX_D2P_RTCODE 0x0100
> > > #define MIPITX_D2_SW_CTL_EN 0x0144
> > > #define MIPITX_D0_SW_CTL_EN 0x0244
> > > #define MIPITX_CK_CKMODE_EN 0x0328
> > > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > > };
> > >
> > > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > > +{
> > > + u32 *buf;
> > > + u32 rt_code[5];
> > > + int i, j;
> > > + struct nvmem_cell *cell;
> > > + struct device *dev = mipi_tx->dev;
> > > + size_t len;
> > > +
> > > + cell = nvmem_cell_get(dev, "calibration-data");
> > > + if (IS_ERR(cell)) {
> > > + dev_info(dev, "nvmem_cell_get fail\n");
> > > + return;
> > > + }
> > > +
> > > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > > +
> > > + nvmem_cell_put(cell);
> > > +
> > > + if (IS_ERR(buf)) {
> > > + dev_info(dev, "can't get data\n");
> > > + return;
> > > + }
> > > +
> > > + if (len < 3 * sizeof(u32)) {
> > > + dev_info(dev, "invalid calibration data\n");
> > > + kfree(buf);
> > > + return;
> > > + }
> > > +
> > > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
> >
> > Why not just save rt_code in nvmem and you don't need to translate here?
> > If you need to do so, please add description for this.
> >
> > Regards,
> > Chun-Kuang.
> >
>
> Hi Chun-Kuang,
>
> The calibration data is flashed in rom when the IC FT test
> And the data struct can't be stored again

OK, it looks like this transtation is necessary.
If it's fixed, I would like to get the rt_code when probe or somewhere
initialization.

Regards,
Chun-Kuang.

>
> Best Regards
> JItao
> >
> > > +
> > > + for (i = 0; i < 5; i++) {
> > > + if ((rt_code[i] & 0x1f) == 0)
> > > + rt_code[i] |= 0x10;
> > > +
> > > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > > + rt_code[i] |= 0x10 << 5;
> > > +
> > > + for (j = 0; j < 10; j++)
> > > + mtk_mipi_tx_update_bits(mipi_tx,
> > > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > > + 1, rt_code[i] >> j & 1);
> > > + }
> > > +
> > > + kfree(buf);
> > > +}
> > > +
> > > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > {
> > > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > RG_DSI_HSTX_LDO_REF_SEL,
> > > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> > >
> > > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > > +
> > > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > > }
> > >
> > > --
> > > 2.21.0
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>

\
 
 \ /
  Last update: 2020-04-05 18:28    [W:0.074 / U:1.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site