lkml.org 
[lkml]   [2020]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH 0/7] Add support for Allwinner H6 DVFS
Hi,

On Sun, 5 Apr 2020 at 16:54, Ondřej Jirman <megous@megous.com> wrote:
>
> Hi,
>
> On Sun, Apr 05, 2020 at 04:33:37PM +0200, Clément Péron wrote:
> > Hi Ondřej,
>
> [ ... ]
>
> > Good point, this information should be added for both CPU and GPU regulator.
> > This could be nice to confirm this point with a scope.
> >
> > Also I remark that Allwinner user higher temperature than what we set :
> > alarm_low_temp = <105000>;
> > alarm_high_temp = <110000>;
> > alarm_temp_hysteresis = <15000>;
> > shut_temp= <115000>;
> > https://github.com/orangepi-xunlong/OrangePiH6_Linux4_9/blob/master/arch/arm64/boot/dts/sunxi/sun50iw6p1.dtsi#L1924
> >
> > Don't you think that we can push a bit higher the temperature it's
> > actually at 80°C ?
>
> We probably can. But just 5°C between high temp and criticla temp is probably
> not enough. I'd probably set our value to something like 90-100°C so that quick
> temperature spike before regulation kicks in would not shutdown the CPU.

OK I will push it to 85°C and leave the critical to 100°C.

Test it again and will send a v2

Regards,
Clément

>
> regards,
> o.
>
> > Thanks for the review,
> > Clement
> >

\
 
 \ /
  Last update: 2020-04-05 17:02    [W:0.051 / U:3.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site