lkml.org 
[lkml]   [2020]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: acr: failed to load firmware with Kernel 5.6. Kernel 5.5 works just fine.
On Fri, Apr 3, 2020 at 7:23 PM Ilia Mirkin <imirkin@alum.mit.edu> wrote:
>
> On Fri, Apr 3, 2020 at 1:21 PM Zeno Davatz <zdavatz@gmail.com> wrote:
> >
> > On Fri, Apr 3, 2020 at 6:59 PM Ilia Mirkin <imirkin@alum.mit.edu> wrote:
> > >
> > > Ben -- probably the ACR changes in 5.6 don't fall back nicely anymore
> > > when there's no firmware? The load shouldn't be failed, just GR
> > > disabled...
> > >
> > > Zeno -- if you grab linux-firmware, it should be all better. Not sure
> > > if you're missing it on purpose or by accident.
> >
> > Thank you, Ilia
> >
> > I will try that on my Gentoo/Funtoo machine now. So far linux-firmware
> > was not needed with Kernel 5.5, so it was not installed on my machine.
>
> It was needed on 5.5 as well. It's just that it fell back gracefully
> without firmware, and you didn't get any acceleration features.

Thank you, Ilia

Installing linux-firmware-20200122 on Gentoo/Funtoo Linux with Kernel
5.6 did not really help.

I still get the same message.

~> dmesg | grep nouveau
[ 0.762819] nouveau 0000:05:00.0: NVIDIA GP107 (137000a1)
[ 0.875252] nouveau 0000:05:00.0: bios: version 86.07.42.00.4a
[ 0.875552] nouveau 0000:05:00.0: acr: failed to load firmware
[ 0.875651] nouveau 0000:05:00.0: acr: failed to load firmware
[ 0.875751] nouveau 0000:05:00.0: acr ctor failed, -2
[ 0.875850] nouveau: probe of 0000:05:00.0 failed with error -2
~> uname -a
Linux zenogentoo 5.6.0 #74 SMP Fri Apr 3 19:44:55 CEST 2020 x86_64
Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz GenuineIntel GNU/Linux

is there any other Kernel setting I need for 5.6?

Best
Zeno

\
 
 \ /
  Last update: 2020-04-03 19:51    [W:0.048 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site