[lkml]   [2020]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH V2 1/4] powercap/drivers/idle_inject: Specify idle state max latency
On 03/04/2020 11:38, Rafael J. Wysocki wrote:
> On Monday, March 30, 2020 12:03:17 AM CEST Daniel Lezcano wrote:
>> Currently the idle injection framework uses the play_idle()
>> function which puts the current CPU in an idle state. The idle
>> state is the deepest one, as specified by the latency constraint
>> when calling the subsequent play_idle_precise() function with the
>> The idle_injection is used by the cpuidle_cooling device which
>> computes the idle / run duration to mitigate the temperature by
>> injecting idle cycles. The cooling device has no control on the
>> depth of the idle state.
>> Allow finer control of the idle injection mechanism by allowing
>> to specify the latency for the idle state. Thus the cooling
>> device has the ability to have a guarantee on the exit latency of
>> the idle states it is injecting.
>> Signed-off-by: Daniel Lezcano <>
> Acked-by: Rafael J. Wysocki <>
> And I'm assuming that you will take care of the series yourself.

Yes, thanks for reviewing.

- Daniel

<> │ Open source software for ARM SoCs

Follow Linaro: <> Facebook |
<!/linaroorg> Twitter |
<> Blog

 \ /
  Last update: 2020-04-03 13:09    [W:0.153 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site