lkml.org 
[lkml]   [2020]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 00/10] Multiple fixes in PCIe qcom driver
From
Date
Hi Ansuel,

Please run "checkpatch --strict" for the next version.

On 4/2/20 3:11 PM, Ansuel Smith wrote:
> This contains multiple fix for PCIe qcom driver.
> Some optional reset and clocks were missing.
> Fix a problem with no PARF programming that cause kernel lock on load.
> Add support to force gen 1 speed if needed. (due to hardware limitation)
> Add ipq8064 rev 2 support that use a different tx termination offset.
>
> v2:
> * Drop iATU programming (already done in pcie init)
> * Use max-link-speed instead of force-gen1 custom definition
> * Drop MRRS to 256B (Can't find a realy reason why this was suggested)
> * Introduce a new variant for different revision of ipq8064
>
> Abhishek Sahu (1):
> PCIe: qcom: change duplicate PCI reset to phy reset
>
> Ansuel Smith (7):
> PCIe: qcom: add missing ipq806x clocks in PCIe driver
> devicetree: bindings: pci: add missing clks to qcom,pcie
> PCIe: qcom: Fixed pcie_phy_clk branch issue
> PCIe: qcom: add missing reset for ipq806x
> devicetree: bindings: pci: add ext reset to qcom,pcie
> PCIe: qcom: fix init problem with missing PARF programming
> devicetree: bindings: pci: add ipq8064 rev 2 variant to qcom,pcie
>
> Sham Muthayyan (2):
> PCIe: qcom: add ipq8064 rev2 variant and set tx term offset
> PCIe: qcom: add Force GEN1 support
>
> .../devicetree/bindings/pci/qcom,pcie.txt | 56 +++++++-
> drivers/pci/controller/dwc/pcie-qcom.c | 134 +++++++++++++++---
> 2 files changed, 167 insertions(+), 23 deletions(-)
>

--
regards,
Stan

\
 
 \ /
  Last update: 2020-04-03 11:02    [W:0.137 / U:4.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site