lkml.org 
[lkml]   [2020]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 5/5] usb: chipidea: allow disabling glue drivers if EMBEDDED
Allow to cut down on driver size for embedded config.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
drivers/usb/chipidea/Kconfig | 37 ++++++++++++++++++++++++-----------
drivers/usb/chipidea/Makefile | 12 +++++-------
2 files changed, 31 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index d53db520e209..8bafcfc6080d 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -18,17 +18,6 @@ config USB_CHIPIDEA

if USB_CHIPIDEA

-config USB_CHIPIDEA_OF
- tristate
- depends on OF
- default USB_CHIPIDEA
-
-config USB_CHIPIDEA_PCI
- tristate
- depends on USB_PCI
- depends on NOP_USB_XCEIV
- default USB_CHIPIDEA
-
config USB_CHIPIDEA_UDC
bool "ChipIdea device controller"
depends on USB_GADGET
@@ -43,4 +32,30 @@ config USB_CHIPIDEA_HOST
help
Say Y here to enable host controller functionality of the
ChipIdea driver.
+
+config USB_CHIPIDEA_PCI
+ tristate "Enable PCI glue driver" if EMBEDDED
+ depends on USB_PCI
+ depends on NOP_USB_XCEIV
+ default USB_CHIPIDEA
+
+config USB_CHIPIDEA_MSM
+ tristate "Enable MSM hsusb glue driver" if EMBEDDED
+ default USB_CHIPIDEA
+
+config USB_CHIPIDEA_IMX
+ tristate "Enable i.MX USB glue driver" if EMBEDDED
+ depends on OF
+ default USB_CHIPIDEA
+
+config USB_CHIPIDEA_GENERIC
+ tristate "Enable generic USB2 glue driver" if EMBEDDED
+ default USB_CHIPIDEA
+
+config USB_CHIPIDEA_TEGRA
+ tristate "Enable Tegra UDC glue driver" if EMBEDDED
+ depends on OF
+ depends on USB_CHIPIDEA_UDC
+ default USB_CHIPIDEA
+
endif
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 985663ba6e68..fae779a23866 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -8,10 +8,8 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o

# Glue/Bridge layers go here

-obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_usb2.o
-obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o
-
-obj-$(CONFIG_USB_CHIPIDEA_PCI) += ci_hdrc_pci.o
-
-obj-$(CONFIG_USB_CHIPIDEA_OF) += usbmisc_imx.o ci_hdrc_imx.o
-obj-$(CONFIG_USB_CHIPIDEA_OF) += ci_hdrc_tegra.o
+obj-$(CONFIG_USB_CHIPIDEA_GENERIC) += ci_hdrc_usb2.o
+obj-$(CONFIG_USB_CHIPIDEA_MSM) += ci_hdrc_msm.o
+obj-$(CONFIG_USB_CHIPIDEA_PCI) += ci_hdrc_pci.o
+obj-$(CONFIG_USB_CHIPIDEA_IMX) += ci_hdrc_imx.o usbmisc_imx.o
+obj-$(CONFIG_USB_CHIPIDEA_TEGRA) += ci_hdrc_tegra.o
--
2.20.1
\
 
 \ /
  Last update: 2020-04-04 02:00    [W:0.142 / U:4.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site