lkml.org 
[lkml]   [2020]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 2/3] clk: meson: add a driver for the Meson8/8b/8m2 SDHC clock controller
Date

On Mon 27 Apr 2020 at 18:33, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:

> Hi Jerome,
>
> thank you for looking into this!
>
> On Mon, Apr 27, 2020 at 10:41 AM Jerome Brunet <jbrunet@baylibre.com> wrote:
> [...]
>> > +#include "clk-regmap.h"
>> > +#include "clk-pll.h"
>>
>> If you need the pll clocks, it should probably appear in the Kconfig
>> deps as well
> this driver does not need "clk-pll.h"
> good catch - thank you
>
>> > +
>> > +#define MESON_SDHC_CLKC 0x10
>> > +
>> > +static const struct clk_regmap meson_mx_sdhc_src_sel = {
>> > + .data = &(struct clk_regmap_mux_data){
>> > + .offset = MESON_SDHC_CLKC,
>> > + .mask = 0x3,
>> > + .shift = 16,
>> > + },
>> > + .hw.init = &(struct clk_init_data){
>> > + .name = "sdhc_src_sel",
>> > + .ops = &clk_regmap_mux_ops,
>> > + .parent_data = (const struct clk_parent_data[]) {
>> > + { .fw_name = "clkin0", .index = -1, },
>> > + { .fw_name = "clkin1", .index = -1, },
>> > + { .fw_name = "clkin2", .index = -1, },
>> > + { .fw_name = "clkin3", .index = -1, },
>>
>> When fw_name is specified, setting the index is not necessary
> noted, will fix this
>
> [...]
>> > + .hw.init = &(struct clk_init_data){
>> > + .name = "sdhc_div",
>> > + .ops = &clk_regmap_divider_ops,
>> > + .parent_data = (const struct clk_parent_data[]) {
>> > + { .name = "sdhc_src_sel", .index = -1, },
>>
>> Any reason for using the lagacy names and not the clk_hw pointers ?
>> Same comment for the rest of the clocks
> indeed, there is a reason and it took me a while to figure out
> __clk_register will set hw->init = NULL;
> This means: if we unregister the driver and register it again all
> hw->init will be lost (as it's now NULL)

I think Stephen recently added the reset to NULL and it might be an
unintended consequence. AFAICT, you should be able to use hw pointer
here even if the driver unloads.
Please report it to linux-clk


> This is why I am effectively cloning (devm_kzalloc + memcpy) these
> clocks which only serve as a template
> Due to this I can't easily use a reference to another clk_hw
>
> We don't have this problem in any of our other clock controller
> drivers because these cannot be unloaded
>
> [...]
>> > + .hw.init = &(struct clk_init_data){
>> > + .name = "sdhc_mod_clk_on",
>> > + .ops = &clk_regmap_gate_ops,
>> > + .parent_data = (const struct clk_parent_data[]) {
>> > + { .name = "sdhc_div", .index = -1, },
>> > + },
>> > + .num_parents = 1,
>> > + .flags = CLK_SET_RATE_GATE,
>>
>> Why can't the clock change rate unless gated ? Maybe you prefer to
>> change the rate in the mmc while clock is gated, but this is the
>> handling of the clock by the mmc driver, not a constraint of the actual
>> clock HW, isn't it ?
>>
>> Also, this is a gate so I suppose the rate propagates through it ?
>> Can you explain why CLK_SET_RATE_PARENT is not set ?
> [...]
>> Ok so apparently you only want to set the rate through the RX clock.
>> You are free to call set_rate() only on this clock in the mmc driver.
>> However, I don't think this should reflect as clock constraints.
> I think these two belong together
> looking back at this I believe that you are right:
> - CLK_SET_RATE_GATE should be dropped because that's not a constraint
> of the clock but of the clock consumer (MMC driver)
> - CLK_SET_RATE_PARENT should be added to all clocks because rate
> propagation will work for all clocks
>
>> > + },
>> > +};
>> > +
>> > +static const struct clk_regmap meson_mx_sdhc_sd_clk_en = {
>> > + .data = &(struct clk_regmap_gate_data){
>> > + .offset = MESON_SDHC_CLKC,
>> > + .bit_idx = 12,
>> > + },
>> > + .hw.init = &(struct clk_init_data){
>> > + .name = "sdhc_sd_clk_on",
>> > + .ops = &clk_regmap_gate_ops,
>> > + .parent_data = (const struct clk_parent_data[]) {
>> > + { .name = "sdhc_div", .index = -1, },
>> > + },
>> > + .num_parents = 1,
>> > + .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
>>
>> ... now I lost with these flags. I'm sure there is an idea related to
>> the mmc driver. Clockwise, I don't get it.
> indeed, just like above I'll fix these
>
>
> Martin

\
 
 \ /
  Last update: 2020-04-27 18:59    [W:0.041 / U:3.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site