lkml.org 
[lkml]   [2020]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/13] arm: dts: s5pv210: aries: Disable pull for vibrator ena GPIO
Date
The enable GPIO for the fixed vibrator regulator shouldn't be
pulled in one direction or the other.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 12575d64aa06..f30bdcb9c083 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -52,6 +52,9 @@
regulator-name = "vibrator-en";
enable-active-high;
gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctr-0 = <&vibrator_ena>;
};

touchkey_vdd: regulator-fixed-1 {
@@ -642,6 +645,12 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};

+ vibrator_ena: vibrator-ena {
+ samsung,pins = "gpj1-1";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
touchkey_i2c_pins: touchkey-i2c-pins {
samsung,pins = "gpj3-0", "gpj3-1";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
--
2.20.1
\
 
 \ /
  Last update: 2020-04-26 20:38    [W:0.035 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site