lkml.org 
[lkml]   [2020]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/8] iio: light: cm32181: Handle ACPI instantiating a cm32181 client on the SMBus ARA
On Sun, Apr 26, 2020 at 2:03 PM Hans de Goede <hdegoede@redhat.com> wrote:
>
> Some ACPI systems list 2 I2C resources for the CM3218 sensor. On these
> systems the first I2cSerialBus ACPI-resource points to the SMBus Alert
> Response Address (ARA, 0x0c) and the second I2cSerialBus ACPI-resource
> points to the actual CM3218 sensor address.
>
> From the ACPI/x86 side devices with more then 1 I2cSerialBus ACPI-resource
> are handled by the drivers/platform/x86/i2c-multi-instantiate.c code.
> This code will instantiate "cm32181" i2c_client-s for both resources.
>
> Add a check to cm32181_probe() for the client's address being the ARA
> address, and in that case fail the probe with -ENODEV.
>
> On these ACPI systems the sensor may have a SMBus Alert asserted at boot,
> if this is the case the sensor will not respond to any i2c_transfers on
> its actual address until we read from the ARA register to clear the Alert.
>
> Therefor we must (try to) read a byte from the client with the ARA
> register, before returning -ENODEV, so that we clear the Alert and when
> we get called again for the client instantiated for the second
> I2cSerialBus ACPI-resource the sensor will respond to our i2c-transfers.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/iio/light/cm32181.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
> index fd371b36c7b3..e8be20d3902c 100644
> --- a/drivers/iio/light/cm32181.c
> +++ b/drivers/iio/light/cm32181.c
> @@ -51,6 +51,8 @@
> #define CM32181_CALIBSCALE_RESOLUTION 1000
> #define MLUX_PER_LUX 1000
>
> +#define SMBUS_ALERT_RESPONSE_ADDRESS 0x0c
> +
> static const u8 cm32181_reg[CM32181_CONF_REG_NUM] = {
> CM32181_REG_ADDR_CMD,
> };
> @@ -333,6 +335,20 @@ static int cm32181_probe(struct i2c_client *client,
> struct iio_dev *indio_dev;
> int ret;
>
> + /*
> + * Some ACPI systems list 2 I2C resources for the CM3218 sensor, the
> + * SMBus Alert Response Address (ARA, 0x0c) and the actual I2C address.
> + * drivers/platform/x86/i2c-multi-instantiate.c instantiates "cm32181"

> + * i2c_client-s for both resources, ignore the ARA client.

A nit: 'I2C clients'

> + * On these systems the sensor may have a SMBus Alert asserted at boot,
> + * in that case the ARA must be read to clear the Alert otherwise the
> + * sensor will not respond on its actual I2C address.
> + */
> + if (client->addr == SMBUS_ALERT_RESPONSE_ADDRESS) {
> + i2c_smbus_read_byte(client);
> + return -ENODEV;
> + }
> +
> indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*cm32181));
> if (!indio_dev) {
> dev_err(&client->dev, "devm_iio_device_alloc failed\n");
> --
> 2.26.0
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-04-26 19:44    [W:0.060 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site