lkml.org 
[lkml]   [2020]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] Changes in w1_therm.c and adding w1_therm.h
From
Date
Le dimanche 26 avril 2020 à 09:51 +0200, Greg KH a écrit :
> On Sat, Apr 25, 2020 at 05:31:41PM +0200, Akira Shimahara wrote:
> > From: Akira SHIMAHARA <akira215corp@gmail.com>
> >
> > Patch for enhacement of w1_therm module. Added features :
> > - Bulk read : send one command for all the slaves
> > on the bus to trigger temperature conversion
> > - Optimized conversion time regarding to device resolution
> > - Dedicated sysfs entry for powering read,
> > resolution set/get, eeprom save/restore
> > - Alarms settings and reading
> > - Code optimization to mitigate bus traffic
> > (devices information are stored to avoid
> > interrogating each device every-time)
> >
> > Following sysfs entry are added :
> > - temperature (RO) : return the temperature in 1/1000°
> > - ext_power (RO) : return the power status of the device
> > - resolution (RW) : get or set the device resolution (supported
> > devices)
> > - eeprom (WO) :trigger a save or restore to/from device EEPROM
> > - alarms (RW) : read or write TH and TL in the device RAM
> > - therm_bulk_read (RW) : Attribute at master level to trigger
> > bulk read and to survey the progress of devices
> > conversions
> > - w1_slave has been kept for compatibility
> >
> > Main motivation was to improve temperature reading speed, which
> > depend
> > on resolution settings of devices. The module store the powwer
> > status and
> > the resolution of each device so that during reading operation, no
> > transaction is required on the bus, which improve speed.
> > The hardware status is checked as soon as a new device is
> > detected,
> > when a user change occurred, or when the corresponding sys file is
> > accessed by user.
> >
> > The bulk read allow to trigger convserion of all devices on the bus
> > at
> > the same time. It will apply a strong pull up on the line if at
> > least
> > one device required it. The duration of the pull up is the max time
> > required by a device on the line.
> >
> > Please let me know any feedback you have on this patch.
> >
> > Thanks ahead,
> >
> > Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
> > ---
> > Changes in v2:
> > - Adding documentation in Documentatin/ABI/testing/sysfs-driver-
> > w1_therm
> > - Updating existing documentation in
> > Documentation/w1/slaves/w1_therm.rst
> >
> > drivers/w1/slaves/w1_therm.c | 1406 ++++++++++++++++++++++++++--
> > ------
> > drivers/w1/slaves/w1_therm.h | 386 ++++++++++
> > 2 files changed, 1470 insertions(+), 322 deletions(-)
> > create mode 100644 drivers/w1/slaves/w1_therm.h
>
> No documentation files are added here :(
>

It's in the PATCH 2/2 included in the previous mail. You want me to
merge in one commit ?. I thought it was easier for you to keep a track
of the v1.

Let me know what you prefer.

Thanks ahead

Akira SHIMAHARA




\
 
 \ /
  Last update: 2020-04-26 14:37    [W:0.064 / U:8.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site