lkml.org 
[lkml]   [2020]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/5] dt-bindings: iio: Introduce common properties for iio sensors
On Sun,  5 Apr 2020 15:50:29 +0200
Guido Günther <agx@sigxcpu.org> wrote:

> Introduce a file for common properties of iio sensors. So far this
> contains the new proximity-near-level property for proximity sensors
> that indicates when an object should be considered near.
>
> Signed-off-by: Guido Günther <agx@sigxcpu.org>
This works for me. However, I would like to give time for Rob and
others to comment on the syntax, naming etc of this file.

Thanks,

Jonathan

> ---
> .../devicetree/bindings/iio/common.yaml | 35 +++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/common.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml
> new file mode 100644
> index 000000000000..97ffcb77043d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/common.yaml
> @@ -0,0 +1,35 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common properties for iio sensors
> +
> +maintainers:
> + - Jonathan Cameron <jic23@kernel.org>
> + - Guido Günther <agx@sigxcpu.org>
> +
> +description: |
> + This document defines device tree properties common to several iio
> + sensors. It doesn't constitue a device tree binding specification by itself but
> + is meant to be referenced by device tree bindings.
> +
> + When referenced from sensor tree bindings the properties defined in this
> + document are defined as follows. The sensor tree bindings are responsible for
> + defining whether each property is required or optional.
> +
> +properties:
> + proximity-near-level:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + For proximity sensors whether an object can be considered near to the
> + device depends on parameters like sensor position, covering glass and
> + aperture. This value gives an indication to userspace for which
> + sensor readings this is the case.
> +
> + Raw proximity values equal or above this level should be
> + considered 'near' to the device (an object is near to the
> + sensor).
> +
> +...

\
 
 \ /
  Last update: 2020-04-12 13:29    [W:0.112 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site