lkml.org 
[lkml]   [2020]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 3/5] Documentation: devicetree: ufs: Add DT bindings for exynos UFS host controller
Hi Rob

On Sun, Apr 5, 2020 at 7:33 AM Rob Herring <robh@kernel.org> wrote:
>
> On Fri, Mar 27, 2020 at 10:36:36PM +0530, Alim Akhtar wrote:
> > This adds Exynos Universal Flash Storage (UFS) Host Controller DT bindings.
>
> Why the inconsistent subject. 'dt-bindings: ...' please.
>
Sure will update
> >
> > Signed-off-by: Seungwon Jeon <essuuj@gmail.com>
> > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> > ---
> > .../devicetree/bindings/ufs/ufs-exynos.txt | 104 ++++++++++++++++++
> > 1 file changed, 104 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/ufs/ufs-exynos.txt
>
> Use DT schema format. Not sure why you'd do that for one and not the
> other...
>
Yah, this is my 1st attempt to write binding in DT schema format, few
things were not clear, now with your review, things got clear. I will
keep the common UFS binding as it is and change exynos UFS binding in
schema format.
Will post the changes soon.

> >
> > diff --git a/Documentation/devicetree/bindings/ufs/ufs-exynos.txt b/Documentation/devicetree/bindings/ufs/ufs-exynos.txt
> > new file mode 100644
> > index 000000000000..08e2d1497b1b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/ufs/ufs-exynos.txt
> > @@ -0,0 +1,104 @@
> > +* Exynos Universal Flash Storage (UFS) Host Controller
> > +
> > +UFSHC nodes are defined to describe on-chip UFS host controllers.
> > +Each UFS controller instance should have its own node.
> > +
> > +Required properties:
> > +- compatible : compatible name, contains "samsung,exynos7-ufs"
> > +- interrupts : <interrupt mapping for UFS host controller IRQ>
> > +- reg : Should contain HCI, vendor specific, UNIPRO and
> > + UFS protector address space
> > +- reg-names : "hci", "vs_hci", "unipro", "ufsp";
> > +
> > +Optional properties:
> > +- vdd-hba-supply : phandle to UFS host controller supply regulator node
> > +- vcc-supply : phandle to VCC supply regulator node
> > +- vccq-supply : phandle to VCCQ supply regulator node
> > +- vccq2-supply : phandle to VCCQ2 supply regulator node
> > +- vcc-supply-1p8 : For embedded UFS devices, valid VCC range is 1.7-1.95V
> > + or 2.7-3.6V. This boolean property when set, specifies
> > + to use low voltage range of 1.7-1.95V. Note for external
> > + UFS cards this property is invalid and valid VCC range is
> > + always 2.7-3.6V.
>
> The supply for vcc-supply should be restricted to the valid range and
> this is not needed.
>
For now, I will leave these common binding as it is.
> > +- vcc-max-microamp : specifies max. load that can be drawn from vcc supply
> > +- vccq-max-microamp : specifies max. load that can be drawn from vccq supply
> > +- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply
>
> How is this information useful?
>
> > +- <name>-fixed-regulator : boolean property specifying that <name>-supply is a fixed regulator
>
> No need for this. Look up the phandle and check supply's node if you
> want to know this.
>
ok
> > +
> > +- clocks : List of phandle and clock specifier pairs
> > +- clock-names : List of clock input name strings sorted in the same
> > + order as the clocks property.
> > + "core", "sclk_unipro_main", "ref" and ref_parent
> > +
> > +- freq-table-hz : Array of <min max> operating frequencies stored in the same
> > + order as the clocks property. If this property is not
> > + defined or a value in the array is "0" then it is assumed
> > + that the frequency is set by the parent clock or a
> > + fixed rate clock source.
> > +- pclk-freq-avail-range : specifies available frequency range(min/max) for APB clock
> > +- ufs,pwr-attr-mode : specifies mode value for power mode change, possible values are
> > + "FAST", "SLOW", "FAST_auto" and "SLOW_auto"
>
> Anything before the ',' is considered a vendor prefix and 'ufs' is not a
> vendor.
>
> If these are standard UFS properties, then they should be documented in
> a common UFS binding. On the flip side, none of the other UFS bindings
> have needed these properties, so why do you?
>
Yah understood, these are not UFS common properties, I will change the
driver instead to handle them.
This will also simply exynos UFS binding.

> > +- ufs,pwr-attr-lane : specifies lane count value for power mode change
> > + allowed values are 1 or 2
> > +- ufs,pwr-attr-gear : specifies gear count value for power mode change
> > + allowed values are 1 or 2
> > +- ufs,pwr-attr-hs-series : specifies HS rate series for power mode change
> > + can be one of "HS_rate_b" or "HS_rate_a"
> > +- ufs,pwr-local-l2-timer : specifies array of local UNIPRO L2 timer values
> > + 3 timers supported
> > + <FC0ProtectionTimeOutVal,TC0ReplayTimeOutVal, AFC0ReqTimeOutVal>
> > +- ufs,pwr-remote-l2-timer : specifies array of remote UNIPRO L2 timer values
> > + 3 timers supported
> > + <FC0ProtectionTimeOutVal,TC0ReplayTimeOutVal, AFC0ReqTimeOutVal>
> > +- ufs-rx-adv-fine-gran-sup_en : specifies support of fine granularity of MPHY,
> > + this is a boolean property.
> > +- ufs-rx-adv-fine-gran-step : specifies granularity steps of MPHY,
> > + allowed step size is 0 to 3
> > +- ufs-rx-adv-min-activate-time-cap : specifies rx advanced minimum activate time of MPHY
> > + range is 1 to 9
> > +- ufs-pa-granularity : specifies Granularity for PA_TActivate and PA_Hibern8Time
> > +- ufs-pa-tacctivate : specifies time to wake-up remote M-RX
> > +- ufs-pa-hibern8time : specifies minimum time to wait in HIBERN8 state
> > +
> > +Note: If above properties are not defined it can be assumed that the supply
> > +regulators or clocks are always on.
> > +
> > +Example:
> > + ufshc@0x15570000 {
> > + compatible = "samsung,exynos7-ufs";
> > + reg = <0x15570000 0x100>,
> > + <0x15570100 0x100>,
> > + <0x15571000 0x200>,
> > + <0x15572000 0x300>;
> > + reg-names = "hci", "vs_hci", "unipro", "ufsp";
> > + interrupts = <0 200 0>;
> > +
> > + vdd-hba-supply = <&xxx_reg0>;
> > + vdd-hba-fixed-regulator;
> > + vcc-supply = <&xxx_reg1>;
> > + vcc-supply-1p8;
> > + vccq-supply = <&xxx_reg2>;
> > + vccq2-supply = <&xxx_reg3>;
> > + vcc-max-microamp = 500000;
> > + vccq-max-microamp = 200000;
> > + vccq2-max-microamp = 200000;
> > +
> > + clocks = <&core 0>, <&ref 0>, <&iface 0>;
> > + clock-names = "core", "sclk_unipro_main", "ref", "ref_parent";
> > + freq-table-hz = <100000000 200000000>, <0 0>, <0 0>, <0 0>;
> > +
> > + pclk-freq-avail-range = <70000000 133000000>;
> > +
> > + ufs,pwr-attr-mode = "FAST";
> > + ufs,pwr-attr-lane = <2>;
> > + ufs,pwr-attr-gear = <2>;
> > + ufs,pwr-attr-hs-series = "HS_rate_b";
> > + ufs,pwr-local-l2-timer = <8000 28000 20000>;
> > + ufs,pwr-remote-l2-timer = <12000 32000 16000>;
> > + ufs-rx-adv-fine-gran-sup_en = <1>;
> > + ufs-rx-adv-fine-gran-step = <3>;
> > + ufs-rx-adv-min-activate-time-cap = <9>;
> > + ufs-pa-granularity = <6>;
> > + ufs-pa-tacctivate = <6>;
> > + ufs-pa-hibern8time = <20>;
> > + };
> > --
> > 2.17.1
> >



--
Regards,
Alim

\
 
 \ /
  Last update: 2020-04-12 07:43    [W:0.043 / U:8.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site