lkml.org 
[lkml]   [2020]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 18/27] powerpc/powernv/pmem: Add controller dump IOCTLs
From
Date
On Wed, 2020-03-04 at 17:53 +1100, Andrew Donnellan wrote:
> On 21/2/20 2:27 pm, Alastair D'Silva wrote:
> > +static int ioctl_controller_dump_data(struct ocxlpmem *ocxlpmem,
> > + struct ioctl_ocxl_pmem_controller_dump_data __user
> > *uarg)
> > +{
> > + struct ioctl_ocxl_pmem_controller_dump_data args;
> > + u16 i;
> > + u64 val;
> > + int rc;
> > +
> > + if (copy_from_user(&args, uarg, sizeof(args)))
> > + return -EFAULT;
> > +
> > + if (args.buf_size % 8)
> > + return -EINVAL;
> > +
> > + if (args.buf_size > ocxlpmem->admin_command.data_size)
> > + return -EINVAL;
> > +
> > + mutex_lock(&ocxlpmem->admin_command.lock);
> > +
> > + rc = admin_command_request(ocxlpmem,
> > ADMIN_COMMAND_CONTROLLER_DUMP);
> > + if (rc)
> > + goto out;
> > +
> > + val = ((u64)args.offset) << 32;
> > + val |= args.buf_size;
> > + rc = ocxl_global_mmio_write64(ocxlpmem->ocxl_afu,
> > + ocxlpmem-
> > >admin_command.request_offset + 0x08,
> > + OCXL_LITTLE_ENDIAN, val);
> > + if (rc)
> > + goto out;
> > +
> > + rc = admin_command_execute(ocxlpmem);
> > + if (rc)
> > + goto out;
> > +
> > + rc = admin_command_complete_timeout(ocxlpmem,
> > + ADMIN_COMMAND_CONTROLLER_DU
> > MP);
> > + if (rc < 0) {
> > + dev_warn(&ocxlpmem->dev, "Controller dump timed
> > out\n");
> > + goto out;
> > + }
> > +
> > + rc = admin_response(ocxlpmem);
> > + if (rc < 0)
> > + goto out;
> > + if (rc != STATUS_SUCCESS) {
> > + warn_status(ocxlpmem,
> > + "Unexpected status from retrieve error
> > log",
>
> Controller dump
>

Ok

> > + rc);
> > + goto out;
> > + }
> > +
> > + for (i = 0; i < args.buf_size; i += 8) {
> > + u64 val;
> > +
> > + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> > + ocxlpmem-
> > >admin_command.data_offset + i,
> > + OCXL_HOST_ENDIAN, &val);
>
> Is a controller dump something where we want to do endian swapping?
>

No, we just have raw binary data that we want to pass through.
OCXL_HOST_ENDIAN does no swapping.

> Any reason we're not doing the usual check of the data identifier,
> additional data length etc?
>

I'll add that

> > + if (rc)
> > + goto out;
> > +
> > + if (copy_to_user(&args.buf[i], &val, sizeof(u64))) {
> > + rc = -EFAULT;
> > + goto out;
> > + }
> > + }
> > +
> > + if (copy_to_user(uarg, &args, sizeof(args))) {
> > + rc = -EFAULT;
> > + goto out;
> > + }
> > +
> > + rc = admin_response_handled(ocxlpmem);
> > + if (rc)
> > + goto out;
> > +
> > +out:
> > + mutex_unlock(&ocxlpmem->admin_command.lock);
> > + return rc;
> > +}
> > +
> > +int request_controller_dump(struct ocxlpmem *ocxlpmem)
> > +{
> > + int rc;
> > + u64 busy = 1;
> > +
> > + rc = ocxl_global_mmio_set64(ocxlpmem->ocxl_afu,
> > GLOBAL_MMIO_CHIC,
> > + OCXL_LITTLE_ENDIAN,
> > + GLOBAL_MMIO_CHI_CDA);
>
> This return code is ignored
>
> > +
> > +
> > + rc = ocxl_global_mmio_set64(ocxlpmem->ocxl_afu,
> > GLOBAL_MMIO_HCI,
> > + OCXL_LITTLE_ENDIAN,
> > + GLOBAL_MMIO_HCI_CONTROLLER_DUMP);
> > + if (rc)
> > + return rc;
> > +
> > + while (busy) {
> > + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> > + GLOBAL_MMIO_HCI,
> > + OCXL_LITTLE_ENDIAN,
> > &busy);
> > + if (rc)
> > + return rc;
> > +
> > + busy &= GLOBAL_MMIO_HCI_CONTROLLER_DUMP;
> > + cond_resched();
> > + }
> > +
> > + return 0;
> > +}
>
>
--
Alastair D'Silva
Open Source Developer
Linux Technology Centre, IBM Australia
mob: 0423 762 819

\
 
 \ /
  Last update: 2020-03-06 04:35    [W:0.117 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site