lkml.org 
[lkml]   [2020]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v3 17/27] powerpc/powernv/pmem: Implement the Read Error Log command
From
Date
On 21/2/20 2:27 pm, Alastair D'Silva wrote:
> From: Alastair D'Silva <alastair@d-silva.org>
>
> The read error log command extracts information from the controller's
> internal error log.
>
> This patch exposes this information in 2 ways:
> - During probe, if an error occurs & a log is available, print it to the
> console
> - After probe, make the error log available to userspace via an IOCTL.
> Userspace is notified of pending error logs in a later patch
> ("powerpc/powernv/pmem: Forward events to userspace")
>
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>

A few minor style checks at
https://openpower.xyz/job/snowpatch/job/snowpatch-linux-checkpatch/11787//artifact/linux/checkpatch.log

We should also add some documentation for the user interfaces we're
adding (same applies for all the remaining patches in this series that
add more interfaces).

> ---
> arch/powerpc/platforms/powernv/pmem/ocxl.c | 269 ++++++++++++++++++
> .../platforms/powernv/pmem/ocxl_internal.h | 1 +
> include/uapi/nvdimm/ocxl-pmem.h | 46 +++
> 3 files changed, 316 insertions(+)
> create mode 100644 include/uapi/nvdimm/ocxl-pmem.h
>
> diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl.c b/arch/powerpc/platforms/powernv/pmem/ocxl.c
> index 63109a870d2c..2b64504f9129 100644
> --- a/arch/powerpc/platforms/powernv/pmem/ocxl.c
> +++ b/arch/powerpc/platforms/powernv/pmem/ocxl.c
> @@ -447,10 +447,219 @@ static int file_release(struct inode *inode, struct file *file)
> return 0;
> }
>
> +/**
> + * error_log_header_parse() - Parse the first 64 bits of the error log command response
> + * @ocxlpmem: the device metadata
> + * @length: out, returns the number of bytes in the response (excluding the 64 bit header)
> + */
> +static int error_log_header_parse(struct ocxlpmem *ocxlpmem, u16 *length)
> +{
> + int rc;
> + u64 val;
> +
> + u16 data_identifier;
> + u32 data_length;
> +
> + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> + ocxlpmem->admin_command.data_offset,
> + OCXL_LITTLE_ENDIAN, &val);
> + if (rc)
> + return rc;
> +
> + data_identifier = val >> 48;
> + data_length = val & 0xFFFF;
> +
> + if (data_identifier != 0x454C) { // 'EL'
> + dev_err(&ocxlpmem->dev,
> + "Bad data identifier for error log data, expected 'EL', got '%2s' (%#x), data_length=%u\n",
> + (char *)&data_identifier,
> + (unsigned int)data_identifier, data_length);
> + return -EINVAL;

This should be something other than EINVAL I think

> + }
> +
> + *length = data_length;
> + return 0;
> +}
> +
> +static int error_log_offset_0x08(struct ocxlpmem *ocxlpmem,
> + u32 *log_identifier, u32 *program_ref_code)
> +{
> + int rc;
> + u64 val;
> +
> + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> + ocxlpmem->admin_command.data_offset + 0x08,
> + OCXL_LITTLE_ENDIAN, &val);
> + if (rc)
> + return rc;
> +
> + *log_identifier = val >> 32;
> + *program_ref_code = val & 0xFFFFFFFF;
> +
> + return 0;
> +}
> +
> +static int read_error_log(struct ocxlpmem *ocxlpmem,
> + struct ioctl_ocxl_pmem_error_log *log, bool buf_is_user)
> +{
> + u64 val;
> + u16 user_buf_length;
> + u16 buf_length;
> + u16 i;
> + int rc;
> +
> + if (log->buf_size % 8)
> + return -EINVAL;
> +
> + rc = ocxlpmem_chi(ocxlpmem, &val);
> + if (rc)
> + goto out;
> +
> + if (!(val & GLOBAL_MMIO_CHI_ELA))
> + return -EAGAIN;
> +
> + user_buf_length = log->buf_size;
> +
> + mutex_lock(&ocxlpmem->admin_command.lock);
> +
> + rc = admin_command_request(ocxlpmem, ADMIN_COMMAND_ERRLOG);
> + if (rc)
> + goto out;
> +
> + rc = admin_command_execute(ocxlpmem);
> + if (rc)
> + goto out;
> +
> + rc = admin_command_complete_timeout(ocxlpmem, ADMIN_COMMAND_ERRLOG);
> + if (rc < 0) {
> + dev_warn(&ocxlpmem->dev, "Read error log timed out\n");
> + goto out;
> + }
> +
> + rc = admin_response(ocxlpmem);
> + if (rc < 0)
> + goto out;
> + if (rc != STATUS_SUCCESS) {
> + warn_status(ocxlpmem, "Unexpected status from retrieve error log", rc);
> + goto out;
> + }
> +
> +
> + rc = error_log_header_parse(ocxlpmem, &log->buf_size);
> + if (rc)
> + goto out;
> + // log->buf_size now contains the returned buffer size, not the user size

In the event that the log is truncated to fit the user buffer, we return
the full log size, I assume this is intentional to signal it's truncated
as per the nd stuff?

> +
> + rc = error_log_offset_0x08(ocxlpmem, &log->log_identifier,
> + &log->program_reference_code);
> + if (rc)
> + goto out;
> +
> + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> + ocxlpmem->admin_command.data_offset + 0x10,
> + OCXL_LITTLE_ENDIAN, &val);
> + if (rc)
> + goto out;
> +
> + log->error_log_type = val >> 56;
> + log->action_flags = (log->error_log_type == OCXL_PMEM_ERROR_LOG_TYPE_GENERAL) ?
> + (val >> 32) & 0xFFFFFF : 0;
> + log->power_on_seconds = val & 0xFFFFFFFF;
> +
> + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> + ocxlpmem->admin_command.data_offset + 0x18,
> + OCXL_LITTLE_ENDIAN, &log->timestamp);
> + if (rc)
> + goto out;
> +
> + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> + ocxlpmem->admin_command.data_offset + 0x20,
> + OCXL_HOST_ENDIAN, &log->wwid[0]);
> + if (rc)
> + goto out;
> +
> + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> + ocxlpmem->admin_command.data_offset + 0x28,
> + OCXL_HOST_ENDIAN, &log->wwid[1]);
> + if (rc)
> + goto out;
> +
> + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> + ocxlpmem->admin_command.data_offset + 0x30,
> + OCXL_HOST_ENDIAN, (u64 *)log->fw_revision);

Why the difference between HOST and LITTLE_ENDIAN between these fields?

> + if (rc)
> + goto out;
> + log->fw_revision[8] = '\0';
> +
> + buf_length = (user_buf_length < log->buf_size) ?
> + user_buf_length : log->buf_size;
> + for (i = 0; i < buf_length + 0x48; i += 8) {

+ 0x48 here doesn't look right...

> + u64 val;
> +
> + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
> + ocxlpmem->admin_command.data_offset + i,

...did you mean to add 0x48 here?

> + OCXL_HOST_ENDIAN, &val);
> + if (rc)
> + goto out;
> +
> + if (buf_is_user) {
> + if (copy_to_user(&log->buf[i], &val, sizeof(u64))) {
> + rc = -EFAULT;
> + goto out;
> + }
> + } else
> + log->buf[i] = val;
Please use braces consistently on both sides of if/else.

> + }
> +
> + rc = admin_response_handled(ocxlpmem);
> + if (rc)
> + goto out;
> +
> +out:
> + mutex_unlock(&ocxlpmem->admin_command.lock);
> + return rc;
> +
> +}
> +
> +static int ioctl_error_log(struct ocxlpmem *ocxlpmem,
> + struct ioctl_ocxl_pmem_error_log __user *uarg)
> +{
> + struct ioctl_ocxl_pmem_error_log args;
> + int rc;
> +
> + if (copy_from_user(&args, uarg, sizeof(args)))
> + return -EFAULT;
> +
> + rc = read_error_log(ocxlpmem, &args, true);
> + if (rc)
> + return rc;
> +
> + if (copy_to_user(uarg, &args, sizeof(args)))
> + return -EFAULT;
> +
> + return 0;
> +}
> +
> +static long file_ioctl(struct file *file, unsigned int cmd, unsigned long args)
> +{
> + struct ocxlpmem *ocxlpmem = file->private_data;
> + int rc = -EINVAL;
> +
> + switch (cmd) {
> + case IOCTL_OCXL_PMEM_ERROR_LOG:
> + rc = ioctl_error_log(ocxlpmem,
> + (struct ioctl_ocxl_pmem_error_log __user *)args);
> + break;
> + }
> + return rc;
> +}
> +
> static const struct file_operations fops = {
> .owner = THIS_MODULE,
> .open = file_open,
> .release = file_release,
> + .unlocked_ioctl = file_ioctl,
> + .compat_ioctl = file_ioctl,
> };
>
> /**
> @@ -527,6 +736,60 @@ static int read_device_metadata(struct ocxlpmem *ocxlpmem)
> return 0;
> }
>
> +static const char *decode_error_log_type(u8 error_log_type)
> +{
> + switch (error_log_type) {
> + case 0x00:
> + return "general";
> + case 0x01:
> + return "predictive failure";
> + case 0x02:
> + return "thermal warning";
> + case 0x03:
> + return "data loss";
> + case 0x04:
> + return "health & performance";
> + default:
> + return "unknown";
> + }
> +}
> +
> +static void dump_error_log(struct ocxlpmem *ocxlpmem)
> +{
> + struct ioctl_ocxl_pmem_error_log log;
> + u32 buf_size;
> + u8 *buf;
> + int rc;
> +
> + if (ocxlpmem->admin_command.data_size == 0)
> + return;
> +
> + buf_size = ocxlpmem->admin_command.data_size - 0x48;
> + buf = kzalloc(buf_size, GFP_KERNEL);
> + if (!buf)
> + return;
> +
> + log.buf = buf;
> + log.buf_size = buf_size;
> +
> + rc = read_error_log(ocxlpmem, &log, false);
> + if (rc < 0)
> + goto out;
> +
> + dev_warn(&ocxlpmem->dev,
> + "OCXL PMEM Error log: WWID=0x%016llx%016llx LID=0x%x PRC=%x type=0x%x %s, Uptime=%u seconds timestamp=0x%llx\n",
> + log.wwid[0], log.wwid[1],
> + log.log_identifier, log.program_reference_code,
> + log.error_log_type,
> + decode_error_log_type(log.error_log_type),
> + log.power_on_seconds, log.timestamp);
> + print_hex_dump(KERN_WARNING, "buf", DUMP_PREFIX_OFFSET, 16, 1, buf,
> + log.buf_size, false); > +
> +out:
> + kfree(buf);
> +}
> +
> /**
> * probe_function0() - Set up function 0 for an OpenCAPI persistent memory device
> * This is important as it enables templates higher than 0 across all other functions,
> @@ -568,6 +831,7 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> struct ocxlpmem *ocxlpmem;
> int rc;
> u16 elapsed, timeout;
> + u64 chi;
>
> if (PCI_FUNC(pdev->devfn) == 0)
> return probe_function0(pdev);
> @@ -667,6 +931,11 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> return 0;
>
> err:
> + if (ocxlpmem &&
> + (ocxlpmem_chi(ocxlpmem, &chi) == 0) &&
> + (chi & GLOBAL_MMIO_CHI_ELA))
> + dump_error_log(ocxlpmem);
> +
> /*
> * Further cleanup is done in the release handler via free_ocxlpmem()
> * This allows us to keep the character device live to handle IOCTLs to
> diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
> index d2d81fec7bb1..b953ee522ed4 100644
> --- a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
> +++ b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
> @@ -5,6 +5,7 @@
> #include <linux/cdev.h>
> #include <misc/ocxl.h>
> #include <linux/libnvdimm.h>
> +#include <uapi/nvdimm/ocxl-pmem.h>
> #include <linux/mm.h>
>
> #define LABEL_AREA_SIZE (1UL << PA_SECTION_SHIFT)
> diff --git a/include/uapi/nvdimm/ocxl-pmem.h b/include/uapi/nvdimm/ocxl-pmem.h
> new file mode 100644
> index 000000000000..b10f8ac0c20f
> --- /dev/null
> +++ b/include/uapi/nvdimm/ocxl-pmem.h
> @@ -0,0 +1,46 @@
> +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
> +/* Copyright 2017 IBM Corp. */
> +#ifndef _UAPI_OCXL_SCM_H
> +#define _UAPI_OCXL_SCM_H
> +
> +#include <linux/types.h>
> +#include <linux/ioctl.h>
> +
> +#define OCXL_PMEM_ERROR_LOG_ACTION_RESET (1 << (32-32))
> +#define OCXL_PMEM_ERROR_LOG_ACTION_CHKFW (1 << (53-32))
> +#define OCXL_PMEM_ERROR_LOG_ACTION_REPLACE (1 << (54-32))
> +#define OCXL_PMEM_ERROR_LOG_ACTION_DUMP (1 << (55-32))
> +
> +#define OCXL_PMEM_ERROR_LOG_TYPE_GENERAL (0x00)
> +#define OCXL_PMEM_ERROR_LOG_TYPE_PREDICTIVE_FAILURE (0x01)
> +#define OCXL_PMEM_ERROR_LOG_TYPE_THERMAL_WARNING (0x02)
> +#define OCXL_PMEM_ERROR_LOG_TYPE_DATA_LOSS (0x03)
> +#define OCXL_PMEM_ERROR_LOG_TYPE_HEALTH_PERFORMANCE (0x04)
> +
> +struct ioctl_ocxl_pmem_error_log {
> + __u32 log_identifier; /* out */
> + __u32 program_reference_code; /* out */
> + __u32 action_flags; /* out, recommended course of action */
> + __u32 power_on_seconds; /* out, Number of seconds the controller has been on when the error occurred */
> + __u64 timestamp; /* out, relative time since the current IPL */
> + __u64 wwid[2]; /* out, the NAA formatted WWID associated with the controller */
> + char fw_revision[8+1]; /* out, firmware revision as null terminated text */
> + __u16 buf_size; /* in/out, buffer size provided/required.
> + * If required is greater than provided, the buffer
> + * will be truncated to the amount provided. If its
> + * less, then only the required bytes will be populated.
> + * If it is 0, then there are no more error log entries.
> + */
> + __u8 error_log_type;
> + __u8 reserved1;
> + __u32 reserved2;
> + __u64 reserved3[2];
> + __u8 *buf; /* pointer to output buffer */
> +};
> +
> +/* ioctl numbers */
> +#define OCXL_PMEM_MAGIC 0x5C
> +/* SCM devices */
> +#define IOCTL_OCXL_PMEM_ERROR_LOG _IOWR(OCXL_PMEM_MAGIC, 0x01, struct ioctl_ocxl_pmem_error_log)
> +
> +#endif /* _UAPI_OCXL_SCM_H */
>

--
Andrew Donnellan OzLabs, ADL Canberra
ajd@linux.ibm.com IBM Australia Limited

\
 
 \ /
  Last update: 2020-03-04 06:59    [W:1.272 / U:1.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site