Messages in this thread |  | | From | Tiezhu Yang <> | Subject | [PATCH v3 0/3] Add basic support for Loongson 7A1000 bridge chip | Date | Tue, 31 Mar 2020 21:33:25 +0800 |
| |
The Loongson 7A1000 bridge chip has been released for several years since the second half of 2017, but it is not supported by the Linux mainline kernel while it only works well with the Loongson internal kernel version. When I update the latest version of Linux mainline kernel on the Loongson 3A3000 CPU and 7A1000 bridge chip system, the boot process failed and I feel depressed.
The 7A1000 bridge chip is used a lot with 3A3000 or 3A4000 CPU in the most Loongson desktop and sever products, it is important to support Loongson 7A1000 bridge chip by the Linux mainline kernel.
This patch series adds the basic support for the Loongson 7A1000 bridge chip, the patch about vendor ID and SATA has been merged into the mainline tree, the next work is to refactor the code about the interrupt controller, and then power management and some other controller device drivers.
By the way, if you want the boot process is successful (just for test) on the Loongson 3A3000 CPU and 7A1000 bridge chip system, you should not only apply these patches, but also need the support for SATA and interrupt controller in the v1 patch series.
This patch series is based on mips-next.
If you have any questions and suggestions, please let me know.
Thanks,
Tiezhu Yang
v2: - The split patch series about Loongson vendor ID and SATA controller has been merged into the linux-block.git by Jens Axboe [1].
- Think about using hierarchy IRQ domain in the patch of interrupt controller, and this maybe depend on the patch series by Jiaxun ("Modernize Loongson64 Machine"), so the patch about interrupt is not included in this v2 patch series.
v3: - The split patch series about Loongson vendor ID and SATA controller has been merged into the mainline tree [2]
- Modify the macro definition and add comment to make it easy to read
- Move ls7a1000_pci_class_quirk() to fixup-loongson3.c
- Use PCI_VENDOR_ID_LOONGSON in pci_ids.h instead of 0x0014
[1] https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git/commit/?h=for-next&id=9acb9fe18d86 https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git/commit/?h=for-next&id=e49bd683e00b [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9acb9fe18d86 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e49bd683e00b
Tiezhu Yang (3): MIPS: Loongson: Get host bridge information MIPS: Loongson: Add DMA support for 7A1000 MIPS: Loongson: Add PCI support for 7A1000
arch/mips/include/asm/mach-loongson64/boot_param.h | 20 +++++++ arch/mips/loongson64/dma.c | 9 ++-- arch/mips/loongson64/env.c | 22 ++++++++ arch/mips/loongson64/init.c | 17 ++++++ arch/mips/pci/fixup-loongson3.c | 12 +++++ arch/mips/pci/ops-loongson3.c | 63 ++++++++++++++++++++-- 6 files changed, 136 insertions(+), 7 deletions(-)
-- 2.1.0
|  |