lkml.org 
[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/23] floppy: use symbolic register names in the x86 port
Date
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.

Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
arch/x86/include/asm/floppy.h | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/floppy.h b/arch/x86/include/asm/floppy.h
index 20088cb08f5e..d43717b423cb 100644
--- a/arch/x86/include/asm/floppy.h
+++ b/arch/x86/include/asm/floppy.h
@@ -77,25 +77,26 @@ static irqreturn_t floppy_hardint(int irq, void *dev_id)
st = 1;
for (lcount = virtual_dma_count, lptr = virtual_dma_addr;
lcount; lcount--, lptr++) {
- st = inb(virtual_dma_port + 4) & 0xa0;
- if (st != 0xa0)
+ st = inb(virtual_dma_port + FD_STATUS);
+ st &= STATUS_DMA | STATUS_READY;
+ if (st != (STATUS_DMA | STATUS_READY))
break;
if (virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port + 5);
+ outb_p(*lptr, virtual_dma_port + FD_DATA);
else
- *lptr = inb_p(virtual_dma_port + 5);
+ *lptr = inb_p(virtual_dma_port + FD_DATA);
}
virtual_dma_count = lcount;
virtual_dma_addr = lptr;
- st = inb(virtual_dma_port + 4);
+ st = inb(virtual_dma_port + FD_STATUS);
}

#ifdef TRACE_FLPY_INT
calls++;
#endif
- if (st == 0x20)
+ if (st == STATUS_DMA)
return IRQ_HANDLED;
- if (!(st & 0x20)) {
+ if (!(st & STATUS_DMA)) {
virtual_dma_residue += virtual_dma_count;
virtual_dma_count = 0;
#ifdef TRACE_FLPY_INT
--
2.20.1
\
 
 \ /
  Last update: 2020-03-31 11:42    [W:0.222 / U:4.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site