lkml.org 
[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 104/155] gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk
Date
From: Hans de Goede <hdegoede@redhat.com>

commit efaa87fa0947d525cf7c075316adde4e3ac7720b upstream.

Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") added a quirk for some models of the HP x2 10 series.

There are 2 issues with the comment describing the quirk:
1) The comment claims the DMI quirk applies to all Cherry Trail based HP x2
10 models. In the mean time I have learned that there are at least 3
models of the HP x2 10 models:

Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC

And this quirk's DMI matches only match the Cherry Trail SoC + TI PMIC
SoC, which is good because we want a slightly different quirk for the
others. This commit updates the comment to make it clear that the quirk
is only for the Cherry Trail SoC + TI PMIC models.

2) The comment says that it is ok to disable wakeup on all ACPI GPIO event
handlers, because there is only the one for the embedded-controller
events. This is not true, there also is a handler for the special
INT0002 device which is related to USB wakeups. We need to also disable
wakeups on that one because the device turns of the USB-keyboard built
into the dock when closing the lid. The XHCI controller takes a while
to notice this, so it only notices it when already suspended, causing
a spurious wakeup because of this. So disabling wakeup on all handlers
is the right thing to do, but not because there only is the one handler
for the EC events. This commit updates the comment to correctly reflect
this.

Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-1-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpio/gpiolib-acpi.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1338,12 +1338,14 @@ static const struct dmi_system_id gpioli
},
{
/*
- * Various HP X2 10 Cherry Trail models use an external
- * embedded-controller connected via I2C + an ACPI GPIO
- * event handler. The embedded controller generates various
- * spurious wakeup events when suspended. So disable wakeup
- * for its handler (it uses the only ACPI GPIO event handler).
- * This breaks wakeup when opening the lid, the user needs
+ * HP X2 10 models with Cherry Trail SoC + TI PMIC use an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FF:01 pin 0, causing spurious wakeups.
+ * When suspending by closing the LID, the power to the USB
+ * keyboard is turned off, causing INT0002 ACPI events to
+ * trigger once the XHCI controller notices the keyboard is
+ * gone. So INT0002 events cause spurious wakeups too. Ignoring
+ * EC wakes breaks wakeup when opening the lid, the user needs
* to press the power-button to wakeup the system. The
* alternative is suspend simply not working, which is worse.
*/

\
 
 \ /
  Last update: 2020-03-31 11:18    [W:0.368 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site