lkml.org 
[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] ARM: DTS: Add devicetree file for the Galaxy S2
From
Date
Hi Paul,

On 2020-03-18 15:25, Paul Cercueil wrote:
>>>  +    };
>>>  +
>>>  +    tsp_reg: regulator-1 {
>>>  +        compatible = "regulator-fixed";
>>>  +        regulator-name = "TSP_FIXED_VOLTAGES";
>>>  +        regulator-min-microvolt = <3300000>;
>>>  +        regulator-max-microvolt = <3300000>;
>>>  +        gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
>>>  +        startup-delay-us = <70000>;
>>>  +        enable-active-high;
>>>  +        regulator-boot-on;
>>>  +        regulator-always-on;
>>
>> always-on and boot-on should not be needed. You have a consumer for this
>> regulator.
>
> About this: the touchscreen driver does not use a regulator, so I
> believe that's why these properties were here.
>
> I sent patches upstream to address the issue:
> https://lkml.org/lkml/2020/3/15/94
>
> I believe this means I cannot merge the i9100 devicetree until it is
> acked.

One more information - similar change has been already posted, but it
looks it got lost then: https://patchwork.kernel.org/patch/10550903/

Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland

\
 
 \ /
  Last update: 2020-03-31 07:37    [W:0.142 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site