lkml.org 
[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.5 004/170] mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
Date
From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 055e04830d4544c57f2a5192a26c9e25915c29c0 ]

It has turned out that the sdhci-omap controller requires the R1B response,
for commands that has this response associated with them. So, converting
from an R1B to an R1 response for a CMD6 for example, leads to problems
with the HW busy detection support.

Fix this by informing the mmc core about the requirement, via setting the
host cap, MMC_CAP_NEED_RSP_BUSY.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: <stable@vger.kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/sdhci-omap.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 083e7e053c954..d3135249b2e40 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -1134,6 +1134,9 @@ static int sdhci_omap_probe(struct platform_device *pdev)
host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;

+ /* R1B responses is required to properly manage HW busy detection. */
+ mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
ret = sdhci_setup_host(host);
if (ret)
goto err_put_sync;
--
2.20.1


\
 
 \ /
  Last update: 2020-03-31 11:03    [W:0.491 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site