lkml.org 
[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v11 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
On 31/03/2020 12:07:36+0800, Hsin-Hsiung Wang wrote:
> From: Ran Bi <ran.bi@mediatek.com>
>
> This add support for the MediaTek MT6358 RTC. Driver using
> compatible data to store different RTC_WRTGR address offset.
> This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
> driver which only needed by armv7 CPU without ATF.
>
> Signed-off-by: Ran Bi <ran.bi@mediatek.com>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> drivers/power/reset/mt6323-poweroff.c | 2 +-
> drivers/rtc/rtc-mt6397.c | 23 +++++++++++++++++++----
> include/linux/mfd/mt6397/rtc.h | 9 ++++++++-
> 3 files changed, 28 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
> index 1caf43d..0532803 100644
> --- a/drivers/power/reset/mt6323-poweroff.c
> +++ b/drivers/power/reset/mt6323-poweroff.c
> @@ -30,7 +30,7 @@ static void mt6323_do_pwroff(void)
> int ret;
>
> regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
> - regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
> + regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR_MT6323, 1);
>
> ret = regmap_read_poll_timeout(pwrc->regmap,
> pwrc->base + RTC_BBPU, val,
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index cda238d..7f3dfd2 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -9,6 +9,7 @@
> #include <linux/mfd/mt6397/core.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> +#include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/rtc.h>
> @@ -20,7 +21,7 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
> int ret;
> u32 data;
>
> - ret = regmap_write(rtc->regmap, rtc->addr_base + RTC_WRTGR, 1);
> + ret = regmap_write(rtc->regmap, rtc->addr_base + rtc->data->wrtgr, 1);
> if (ret < 0)
> return ret;
>
> @@ -269,6 +270,8 @@ static int mtk_rtc_probe(struct platform_device *pdev)
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> rtc->addr_base = res->start;
>
> + rtc->data = of_device_get_match_data(&pdev->dev);
> +
> rtc->irq = platform_get_irq(pdev, 0);
> if (rtc->irq < 0)
> return rtc->irq;
> @@ -325,10 +328,22 @@ static int mt6397_rtc_resume(struct device *dev)
> static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
> mt6397_rtc_resume);
>
> +static const struct mtk_rtc_data mt6358_rtc_data = {
> + .wrtgr = RTC_WRTGR_MT6358,
> +};
> +
> +static const struct mtk_rtc_data mt6397_rtc_data = {
> + .wrtgr = RTC_WRTGR_MT6397,
> +};
> +
> static const struct of_device_id mt6397_rtc_of_match[] = {
> - { .compatible = "mediatek,mt6323-rtc", },
> - { .compatible = "mediatek,mt6397-rtc", },
> - { }
> + { .compatible = "mediatek,mt6323-rtc",
> + .data = &mt6397_rtc_data, },
> + { .compatible = "mediatek,mt6358-rtc",
> + .data = &mt6358_rtc_data, },
> + { .compatible = "mediatek,mt6397-rtc",
> + .data = &mt6397_rtc_data, },

This is weirdly indented.

Else,
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>


--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-03-31 10:07    [W:0.099 / U:3.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site