lkml.org 
[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: imx: allow to disable board specific PHY fixups
On Tue, Mar 31, 2020 at 09:47:19AM +0200, Marc Kleine-Budde wrote:
> On 3/30/20 7:41 PM, Russell King - ARM Linux admin wrote:
> >>> arch/arm/mach-imx/mach-imx6q.c:167: phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
> >>> arch/arm/mach-imx/mach-imx6q.c:169: phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
> >>> arch/arm/mach-imx/mach-imx6q.c:171: phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
> >>> arch/arm/mach-imx/mach-imx6q.c:173: phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
> >
> > As far as I'm concerned, the AR8035 fixup is there with good reason.
> > It's not just "random" but is required to make the AR8035 usable with
> > the iMX6 SoCs. Not because of a board level thing, but because it's
> > required for the AR8035 to be usable with an iMX6 SoC.
>
> Is this still ture, if the AR8035 is attached to a switch behind an iMX6?

Do you know of such a setup, or are you talking about theoretical
situations?

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up

\
 
 \ /
  Last update: 2020-03-31 09:55    [W:0.150 / U:2.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site