lkml.org 
[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones
On Wed, 25 Mar 2020 12:04:54 +0530, Amit Kucheria wrote:
> As part of moving the thermal bindings to YAML, split it up into 3
> bindings: thermal sensors, cooling devices and thermal zones.
>
> The thermal-zone binding is a software abstraction to capture the
> properties of each zone - how often they should be checked, the
> temperature thresholds (trips) at which mitigation actions need to be
> taken and the level of mitigation needed at those thresholds.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> Changes since v2:
> - Addressed review comment from Rob
> - Added required properties for thermal-zones node
> - Added select: true to thermal-cooling-devices.yaml
> - Fixed up example to pass dt_binding_check
>
> .../bindings/thermal/thermal-zones.yaml | 324 ++++++++++++++++++
> 1 file changed, 324 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml
>

The change discussed doesn't affect the schema other than adding a
'maxItems: 1', so:

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2020-03-31 23:21    [W:0.098 / U:1.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site