lkml.org 
[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V10 08/11] iommu/vt-d: Add svm/sva invalidate function
On Tue, 31 Mar 2020 03:34:22 +0000
"Tian, Kevin" <kevin.tian@intel.com> wrote:

> > From: Auger Eric <eric.auger@redhat.com>
> > Sent: Monday, March 30, 2020 12:05 AM
> >
> > On 3/28/20 11:01 AM, Tian, Kevin wrote:
> > >> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > >> Sent: Saturday, March 21, 2020 7:28 AM
> > >>
> > >> When Shared Virtual Address (SVA) is enabled for a guest OS via
> > >> vIOMMU, we need to provide invalidation support at IOMMU API
> > >> and
> > driver
> > >> level. This patch adds Intel VT-d specific function to implement
> > >> iommu passdown invalidate API for shared virtual address.
> > >>
> > >> The use case is for supporting caching structure invalidation
> > >> of assigned SVM capable devices. Emulated IOMMU exposes queue
> > >
> > > emulated IOMMU -> vIOMMU, since virito-iommu could use the
> > > interface as well.
> > >
> > >> invalidation capability and passes down all descriptors from the
> > >> guest to the physical IOMMU.
> > >>
> > >> The assumption is that guest to host device ID mapping should be
> > >> resolved prior to calling IOMMU driver. Based on the device
> > >> handle, host IOMMU driver can replace certain fields before
> > >> submit to the invalidation queue.
> > >>
> > >> ---
> > >> v7 review fixed in v10
> > >> ---
> > >>
> > >> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > >> Signed-off-by: Ashok Raj <ashok.raj@intel.com>
> > >> Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
> > >> ---
> > >> drivers/iommu/intel-iommu.c | 182
> > >> ++++++++++++++++++++++++++++++++++++++++++++
> > >> 1 file changed, 182 insertions(+)
> > >>
> > >> diff --git a/drivers/iommu/intel-iommu.c
> > >> b/drivers/iommu/intel-iommu.c index b1477cd423dd..a76afb0fd51a
> > >> 100644 --- a/drivers/iommu/intel-iommu.c
> > >> +++ b/drivers/iommu/intel-iommu.c
> > >> @@ -5619,6 +5619,187 @@ static void
> > >> intel_iommu_aux_detach_device(struct iommu_domain *domain,
> > >> aux_domain_remove_dev(to_dmar_domain(domain), dev);
> > >> }
> > >>
> > >> +/*
> > >> + * 2D array for converting and sanitizing IOMMU generic TLB
> > >> granularity
> > to
> > >> + * VT-d granularity. Invalidation is typically included in the
> > >> unmap
> > operation
> > >> + * as a result of DMA or VFIO unmap. However, for assigned
> > >> devices
> > guest
> > >> + * owns the first level page tables. Invalidations of
> > >> translation caches in
> > the
> > >> + * guest are trapped and passed down to the host.
> > >> + *
> > >> + * vIOMMU in the guest will only expose first level page
> > >> tables, therefore
> > >> + * we do not include IOTLB granularity for request without
> > >> PASID (second level).
> > >
> > > I would revise above as "We do not support IOTLB granularity for
> > > request without PASID (second level), therefore any vIOMMU
> > > implementation that exposes the SVA capability to the guest
> > > should only expose the first level page tables, implying all
> > > invalidation requests from the guest will include a valid PASID"
> > >
> > >> + *
> > >> + * For example, to find the VT-d granularity encoding for IOTLB
> > >> + * type and page selective granularity within PASID:
> > >> + * X: indexed by iommu cache type
> > >> + * Y: indexed by enum iommu_inv_granularity
> > >> + * [IOMMU_CACHE_INV_TYPE_IOTLB][IOMMU_INV_GRANU_ADDR]
> > >> + *
> > >> + * Granu_map array indicates validity of the table. 1: valid,
> > >> 0: invalid
> > >> + *
> > >> + */
> > >> +const static int
> > >>
> > inv_type_granu_map[IOMMU_CACHE_INV_TYPE_NR][IOMMU_INV_GRANU_
> > >> NR] = {
> > >> + /*
> > >> + * PASID based IOTLB invalidation: PASID selective (per
> > >> PASID),
> > >> + * page selective (address granularity)
> > >> + */
> > >> + {0, 1, 1},
> > >> + /* PASID based dev TLBs, only support all PASIDs or
> > >> single PASID */
> > >> + {1, 1, 0},
> > >
> > > Is this combination correct? when single PASID is being
> > > specified, it is essentially a page-selective invalidation since
> > > you need provide Address and Size.
> > >
> > >> + /* PASID cache */
> > >
> > > PASID cache is fully managed by the host. Guest PASID cache
> > > invalidation is interpreted by vIOMMU for bind and unbind
> > > operations. I don't think we should accept any PASID cache
> > > invalidation from userspace or guest.
> > I tend to agree here.
> > >
> > >> + {1, 1, 0}
> > >> +};
> > >> +
> > >> +const static int
> > >>
> > inv_type_granu_table[IOMMU_CACHE_INV_TYPE_NR][IOMMU_INV_GRANU
> > >> _NR] = {
> > >> + /* PASID based IOTLB */
> > >> + {0, QI_GRAN_NONG_PASID, QI_GRAN_PSI_PASID},
> > >> + /* PASID based dev TLBs */
> > >> + {QI_DEV_IOTLB_GRAN_ALL, QI_DEV_IOTLB_GRAN_PASID_SEL, 0},
> > >> + /* PASID cache */
> > >> + {QI_PC_ALL_PASIDS, QI_PC_PASID_SEL, 0},
> > >> +};
> > >> +
> > >> +static inline int to_vtd_granularity(int type, int granu, int
> > >> *vtd_granu) +{
> > >> + if (type >= IOMMU_CACHE_INV_TYPE_NR || granu >=
> > >> IOMMU_INV_GRANU_NR ||
> > >> + !inv_type_granu_map[type][granu])
> > >> + return -EINVAL;
> > >> +
> > >> + *vtd_granu = inv_type_granu_table[type][granu];
> > >> +
> > >
> > > btw do we really need both map and table here? Can't we just
> > > use one table with unsupported granularity marked as a special
> > > value?
> > I asked the same question some time ago. If I remember correctly the
> > issue is while a granu can be supported in inv_type_granu_map, the
> > associated value in inv_type_granu_table can be 0. This typically
> > matches both values of G field (0 or 1) in the invalidation cmd. See
> > other comment below.
>
> I didn't fully understand it. Also what does a value '0' imply? also
> it's interesting to see below in [PATCH 07/11]:
>
0 in 2D map array means invalid.
0 in granu table can be either valid or invalid
That is why we need the map table to tell the difference.
I will add following comments since this causes lots of confusion.

* Granu_map array indicates validity of the table. 1: valid, 0: invalid
* This is useful when the entry in the granu table has a value of 0,
* which can be a valid or invalid value.


> +/* QI Dev-IOTLB inv granu */
> +#define QI_DEV_IOTLB_GRAN_ALL 1
> +#define QI_DEV_IOTLB_GRAN_PASID_SEL 0
> +
Sorry I didn't get the point? These are the valid vt-d granu values.
Per Spec CH 6.5.2.6

> > >
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static inline u64 to_vtd_size(u64 granu_size, u64 nr_granules)
> > >> +{
> > >> + u64 nr_pages = (granu_size * nr_granules) >>
> > >> VTD_PAGE_SHIFT; +
> > >> + /* VT-d size is encoded as 2^size of 4K pages, 0 for
> > >> 4k, 9 for 2MB, etc.
> > >> + * IOMMU cache invalidate API passes granu_size in
> > >> bytes, and number of
> > >> + * granu size in contiguous memory.
> > >> + */
> > >> + return order_base_2(nr_pages);
> > >> +}
> > >> +
> > >> +#ifdef CONFIG_INTEL_IOMMU_SVM
> > >> +static int intel_iommu_sva_invalidate(struct iommu_domain
> > >> *domain,
> > >> + struct device *dev, struct
> > >> iommu_cache_invalidate_info *inv_info)
> > >> +{
> > >> + struct dmar_domain *dmar_domain =
> > >> to_dmar_domain(domain);
> > >> + struct device_domain_info *info;
> > >> + struct intel_iommu *iommu;
> > >> + unsigned long flags;
> > >> + int cache_type;
> > >> + u8 bus, devfn;
> > >> + u16 did, sid;
> > >> + int ret = 0;
> > >> + u64 size = 0;
> > >> +
> > >> + if (!inv_info || !dmar_domain ||
> > >> + inv_info->version !=
> > >> IOMMU_CACHE_INVALIDATE_INFO_VERSION_1)
> > >> + return -EINVAL;
> > >> +
> > >> + if (!dev || !dev_is_pci(dev))
> > >> + return -ENODEV;
> > >> +
> > >> + iommu = device_to_iommu(dev, &bus, &devfn);
> > >> + if (!iommu)
> > >> + return -ENODEV;
> > >> +
> > >> + spin_lock_irqsave(&device_domain_lock, flags);
> > >> + spin_lock(&iommu->lock);
> > >> + info = iommu_support_dev_iotlb(dmar_domain, iommu, bus,
> > >> devfn);
> > >> + if (!info) {
> > >> + ret = -EINVAL;
> > >> + goto out_unlock;
> > >
> > > -ENOTSUPP?
> > >
> > >> + }
> > >> + did = dmar_domain->iommu_did[iommu->seq_id];
> > >> + sid = PCI_DEVID(bus, devfn);
> > >> +
> > >> + /* Size is only valid in non-PASID selective
> > >> invalidation */
> > >> + if (inv_info->granularity != IOMMU_INV_GRANU_PASID)
> > >> + size =
> > >> to_vtd_size(inv_info->addr_info.granule_size,
> > >> +
> > >> inv_info->addr_info.nb_granules); +
> > >> + for_each_set_bit(cache_type, (unsigned long
> > >> *)&inv_info->cache, IOMMU_CACHE_INV_TYPE_NR) {
> > >> + int granu = 0;
> > >> + u64 pasid = 0;
> > >> +
> > >> + ret = to_vtd_granularity(cache_type,
> > >> inv_info->granularity, &granu);
> > >> + if (ret) {
> > >> + pr_err("Invalid cache type and granu
> > >> combination %d/%d\n", cache_type,
> > >> + inv_info->granularity);
> > >> + break;
> > >> + }
> > >> +
> > >> + /* PASID is stored in different locations based
> > >> on granularity */
> > >> + if (inv_info->granularity ==
> > >> IOMMU_INV_GRANU_PASID &&
> > >> + inv_info->pasid_info.flags &
> > >> IOMMU_INV_PASID_FLAGS_PASID)
> > >> + pasid = inv_info->pasid_info.pasid;
> > >> + else if (inv_info->granularity ==
> > >> IOMMU_INV_GRANU_ADDR &&
> > >> + inv_info->addr_info.flags &
> > >> IOMMU_INV_ADDR_FLAGS_PASID)
> > >> + pasid = inv_info->addr_info.pasid;
> > >> + else {
> > >> + pr_err("Cannot find PASID for given
> > >> cache type and granularity\n");
> > >> + break;
> > >> + }
> > >> +
> > >> + switch (BIT(cache_type)) {
> > >> + case IOMMU_CACHE_INV_TYPE_IOTLB:
> > >> + if ((inv_info->granularity !=
> > >> IOMMU_INV_GRANU_PASID) &&
> > >
> > > granularity == IOMMU_INV_GRANU_ADDR? otherwise it's unclear
> > > why IOMMU_INV_GRANU_DOMAIN also needs size check.
> > >
> > >> + size &&
> > >> (inv_info->addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1)))
> > >> {
> > >> + pr_err("Address out of range,
> > >> 0x%llx, size order %llu\n",
> > >> +
> > >> inv_info->addr_info.addr, size);
> > >> + ret = -ERANGE;
> > >> + goto out_unlock;
> > >> + }
> > >> +
> > >> + qi_flush_piotlb(iommu, did,
> > >> + pasid,
> > >> +
> > >> mm_to_dma_pfn(inv_info-
> > >>> addr_info.addr),
> > >> + (granu ==
> > >> QI_GRAN_NONG_PASID) ? - 1 : 1 << size,
> > >> +
> > >> inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
> > >> +
> > >> + /*
> > >> + * Always flush device IOTLB if ATS is
> > >> enabled since guest
> > >> + * vIOMMU exposes CM = 1, no device
> > >> IOTLB flush will be passed
> > >> + * down.
> > >> + */
> > >
> > > Does VT-d spec mention that no device IOTLB flush is required
> > > when CM=1?
> > >> + if (info->ats_enabled) {
> > >> + qi_flush_dev_iotlb_pasid(iommu,
> > >> sid, info-
> > >>> pfsid,
> > >> + pasid,
> > >> info->ats_qdep,
> > >> +
> > >> inv_info->addr_info.addr, size,
> > >> + granu);
> > >> + }
> > >> + break;
> > >> + case IOMMU_CACHE_INV_TYPE_DEV_IOTLB:
> > >> + if (info->ats_enabled) {
> > >> + qi_flush_dev_iotlb_pasid(iommu,
> > >> sid, info-
> > >>> pfsid,
> > >> +
> > >> inv_info->addr_info.pasid, info->ats_qdep,
> > >> +
> > >> inv_info->addr_info.addr, size,
> > >> + granu);
> > >
> > > I'm confused here. There are two granularities allowed for
> > > devtlb, but here you only handle one of them?
> > granu is the result of to_vtd_granularity() so it can take either
> > of the 2 values.
>
> yes, you're right.
>
> >
> > Thanks
> >
> > Eric
> > >
> > >> + } else
> > >> + pr_warn("Passdown device IOTLB
> > >> flush w/o ATS!\n");
> > >> +
> > >> + break;
> > >> + case IOMMU_CACHE_INV_TYPE_PASID:
> > >> + qi_flush_pasid_cache(iommu, did, granu,
> > >> inv_info-
> > >>> pasid_info.pasid);
> > >> +
> > >
> > > as earlier comment, we shouldn't allow userspace or guest to
> > > invalidate PASID cache
> > >
> > >> + break;
> > >> + default:
> > >> + dev_err(dev, "Unsupported IOMMU
> > >> invalidation type %d\n",
> > >> + cache_type);
> > >> + ret = -EINVAL;
> > >> + }
> > >> + }
> > >> +out_unlock:
> > >> + spin_unlock(&iommu->lock);
> > >> + spin_unlock_irqrestore(&device_domain_lock, flags);
> > >> +
> > >> + return ret;
> > >> +}
> > >> +#endif
> > >> +
> > >> static int intel_iommu_map(struct iommu_domain *domain,
> > >> unsigned long iova, phys_addr_t hpa,
> > >> size_t size, int iommu_prot, gfp_t
> > >> gfp) @@ -6204,6 +6385,7 @@ const struct iommu_ops
> > >> intel_iommu_ops = { .is_attach_deferred =
> > >> intel_iommu_is_attach_deferred, .pgsize_bitmap =
> > >> INTEL_IOMMU_PGSIZES, #ifdef CONFIG_INTEL_IOMMU_SVM
> > >> + .cache_invalidate = intel_iommu_sva_invalidate,
> > >> .sva_bind_gpasid = intel_svm_bind_gpasid,
> > >> .sva_unbind_gpasid = intel_svm_unbind_gpasid,
> > >> #endif
> > >> --
> > >> 2.7.4
> > >
>

[Jacob Pan]

\
 
 \ /
  Last update: 2020-03-31 23:02    [W:0.144 / U:1.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site