[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2] ARM: imx: allow to disable board specific PHY fixups
On 3/30/20 7:41 PM, Russell King - ARM Linux admin wrote:
>>> arch/arm/mach-imx/mach-imx6q.c:167: phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
>>> arch/arm/mach-imx/mach-imx6q.c:169: phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
>>> arch/arm/mach-imx/mach-imx6q.c:171: phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
>>> arch/arm/mach-imx/mach-imx6q.c:173: phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
> As far as I'm concerned, the AR8035 fixup is there with good reason.
> It's not just "random" but is required to make the AR8035 usable with
> the iMX6 SoCs. Not because of a board level thing, but because it's
> required for the AR8035 to be usable with an iMX6 SoC.

Is this still ture, if the AR8035 is attached to a switch behind an iMX6?


Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

 \ /
  Last update: 2020-03-31 09:48    [W:0.733 / U:1.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site