[lkml]   [2020]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/5] Support the Allwinner F1C100s USB stack
The Allwinner F1C100s has an MUSB-based USB peripheral.  This patch
series implements support for it alongside existing Allwinner support

This series was originally written by Icenowy Zheng for Linux v4.14.
I've rebased and bugfixed that work against mainline and tested it on
both the Lichee Nano and my custom hardware. Where I've made functional
changes, I have changed the commit author to myself.

This is a follow-up to the previous series [1], a little late on my
self-imposed schedule but here nonetheless.


George Hilliard (2):
dt-bindings: Add new F1C100s compatible strings for USB
musb: sunxi: add support for the suniv MUSB controller

Icenowy Zheng (3):
phy: sun4i-usb: add support for the USB PHY on suniv SoC
ARM: suniv: add USB-related device nodes
ARM: suniv: f1c100s: enable USB on Lichee Pi Nano

.../phy/allwinner,sun4i-a10-usb-phy.yaml | 1 +
.../usb/allwinner,sun4i-a10-musb.yaml | 1 +
.../boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++++++++
arch/arm/boot/dts/suniv-f1c100s.dtsi | 29 +++++++++++++++++++
drivers/phy/allwinner/phy-sun4i-usb.c | 10 +++++++
drivers/usb/musb/sunxi.c | 8 +++--
6 files changed, 63 insertions(+), 2 deletions(-)


 \ /
  Last update: 2020-03-31 19:03    [W:0.035 / U:4.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site