lkml.org 
[lkml]   [2020]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v1 3/5] arm64: dts: amlogic: meson-gx: add the Mali-450 OPP table and use DVFS
Date
Add the OPP table for the Mali-450 GPU and drop the hardcoded initial
clock configuration. This enables GPU DVFS and thus saves power when the
GPU is not in use while still being able switch to a higher clock on
demand.

While here, make most of meson-gxl-mali re-usable to reduce the amount
of duplicate code between GXBB and GXL. This is more important now as we
don't want to duplicate the GPU OPP table.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../boot/dts/amlogic/meson-gx-mali450.dtsi | 61 +++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 51 ++++------------
.../boot/dts/amlogic/meson-gxl-mali.dtsi | 46 +++-----------
3 files changed, 81 insertions(+), 77 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
new file mode 100644
index 000000000000..f9771b51c852
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-125000000 {
+ opp-hz = /bits/ 64 <125000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-285714285 {
+ opp-hz = /bits/ 64 <285714285>;
+ opp-microvolt = <950000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-666666666 {
+ opp-hz = /bits/ 64 <666666666>;
+ opp-microvolt = <950000>;
+ };
+ opp-744000000 {
+ opp-hz = /bits/ 64 <744000000>;
+ opp-microvolt = <950000>;
+ };
+ };
+};
+
+&apb {
+ mali: gpu@c0000 {
+ compatible = "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ operating-points-v2 = <&gpu_opp_table>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 0cb40326b0d3..e43b330129c7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -4,6 +4,7 @@
*/

#include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
@@ -241,46 +242,6 @@ mux {
};
};

-&apb {
- mali: gpu@c0000 {
- compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
-
- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_GP0_PLL>,
- <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <0>, /* Do Nothing */
- <&clkc CLKID_GP0_PLL>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <744000000>,
- <0>, /* Do Nothing */
- <744000000>,
- <0>; /* Do Nothing */
- };
-};
-
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
@@ -362,6 +323,16 @@ &i2c_C {
clocks = <&clkc CLKID_I2C>;
};

+&mali {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ assigned-clocks = <&clkc CLKID_GP0_PLL>;
+ assigned-clock-rates = <744000000>;
+};
+
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
index 6aaafff674f9..478e755cc87c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
@@ -4,42 +4,14 @@
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/

-&apb {
- mali: gpu@c0000 {
- compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
+#include "meson-gx-mali450.dtsi"

- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_GP0_PLL>,
- <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <0>, /* Do Nothing */
- <&clkc CLKID_GP0_PLL>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <744000000>,
- <0>, /* Do Nothing */
- <744000000>,
- <0>; /* Do Nothing */
- };
+&mali {
+ compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
+
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ assigned-clocks = <&clkc CLKID_GP0_PLL>;
+ assigned-clock-rates = <744000000>;
};
--
2.26.0
\
 
 \ /
  Last update: 2020-03-31 00:12    [W:0.067 / U:1.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site