[lkml]   [2020]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 00/14] usb: dwc3: meson: add OTG support for GXL/GXM


Neil Armstrong <> writes:
> The USB support was initialy done with a set of PHYs and dwc3-of-simple
> because the architecture of the USB complex was not understood correctly
> at the time (and proper documentation was missing...).
> But with the G12A family, the USB complex was correctly understood and
> implemented correctly.
> But seems the G12A architecture was derived for the GXL USB architecture,
> with minor differences and looks we can share most of the USB DWC3 glue
> driver.
> This patchset refactors and adds callbacks to handle the architecture
> difference while keeping the main code shared.
> The main difference is that on GXL/GXM the USB2 PHY control registers
> are mixed with the PHY registers (we already handle correctly), and
> the GLUE registers are allmost (99%) the same as G12A.
> But, the GXL/GXM HW is buggy, here are the quirks :
> - for the DWC2 controller to reset correctly, the GLUE mux must be switched
> to peripheral when the DWC2 controller probes. For now it's handled by simply
> switching to device when probing the subnodes, but it may be not enough
> - when manually switching from Host to Device when the USB port is not
> populated (should not happen with proper Micro-USB/USB-C OTG switch), it
> makes the DWC3 to crash. The only way to avoid that is to use the Host
> Disconnect bit to disconnect the DWC3 controller from the port, but we can't
> recover the Host functionnality unless resetting the DWC3 controller.
> This bit is set when only manual switch is done, and a warning is printed
> on manual switching.
> The patches 1-9 should be applied first, then either waiting the next release
> or if the usb maintainer can provide us a stable tag, we can use it to merge
> the DT and bindings.
> Changes since v1 at [1]:
> - Fixed DT bindings to take in account usb2-phy2 on GXM
> - Added comment in patch2
> - Fixed patch 5 and moved fix out
> - Collected tags
> - Lower DT patch changes, switch p20x-q20x port B as OTG by default

patches 1-6 are applied to my testing/next

[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2020-03-29 12:37    [W:0.066 / U:8.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site